Man page - ao-usbtrng(1)
Packages contains this manual
- ao-test-baro(1)
- ao-test-flash(1)
- ao-send-telem(1)
- ao-reset-lpc(1)
- ao-elftohex(1)
- ao-telem(1)
- ao-dumpflash(1)
- ao-dbg(1)
- ao-bitbang(1)
- ao-rawload(1)
- ao-cal-accel(1)
- ao-ejection(1)
- ao-flash-stm32f0x(1)
- ao-flash-stm(1)
- ao-test-igniter(1)
- ao-list(1)
- ao-flash-samd21(1)
- altosui(1)
- ao-test-pressure(1)
- micropeak(1)
- ao-dump-up(1)
- ao-edit-telem(1)
- ao-load(1)
- ao-test-gps(1)
- ao-cal-freq(1)
- ao-usbload(1)
- ao-sky-flash(1)
- ao-usbtrng(1)
- ao-eeprom(1)
- ao-flash-stm32f1(1)
- ao-flash-lpc(1)
- ao-makebin(1)
- telegps(1)
apt-get install altos
Manual
AO-USBTRNG
NAMESYNOPSIS
DESCRIPTION
OPTIONS
USAGE
AUTHOR
NAME
ao-usbtrng - dump random numbers from USBtrng
SYNOPSIS
ao-usbtrng [OPTION...] [KBYTES]
DESCRIPTION
ao-usbtrng dumps random numbers from a USBtrng device. If provided KBYTES specifies the number of 1024 byte blocks to produce on standard output. Without KBYTES ao-usbtrng produces random bytes continuously until killed.
OPTIONS
-v, --verbose
increase verbosity
-T, -tty=TTYDEVICE
This selects which tty device the debugger uses to communicate with the target device. The special name ’BITBANG’ directs ao-dbg to use the cp2103 connection, otherwise this should be a usb serial port connected to a suitable cc1111 debug node.
-D, --device=ALTOSDEVICE
Search for a connected device. This requires an argument of one of the following forms:
usbtrng:2
usbtrng
2
Leaving out the product name will cause the tool to select a suitable product, leaving out the serial number will cause the tool to match one of the available devices.
USAGE
ao-usbtrng opens the target device and reads the specified number of KBYTES of random data.
AUTHOR
Keith Packard