Man page - ao-test-baro(1)
Packages contains this manual
- ao-test-baro(1)
- ao-test-flash(1)
- ao-send-telem(1)
- ao-reset-lpc(1)
- ao-elftohex(1)
- ao-telem(1)
- ao-dumpflash(1)
- ao-dbg(1)
- ao-bitbang(1)
- ao-rawload(1)
- ao-cal-accel(1)
- ao-ejection(1)
- ao-flash-stm32f0x(1)
- ao-flash-stm(1)
- ao-test-igniter(1)
- ao-list(1)
- ao-flash-samd21(1)
- altosui(1)
- ao-test-pressure(1)
- micropeak(1)
- ao-dump-up(1)
- ao-edit-telem(1)
- ao-load(1)
- ao-test-gps(1)
- ao-cal-freq(1)
- ao-usbload(1)
- ao-sky-flash(1)
- ao-usbtrng(1)
- ao-eeprom(1)
- ao-flash-stm32f1(1)
- ao-flash-lpc(1)
- ao-makebin(1)
- telegps(1)
apt-get install altos
Manual
AO-LOAD
NAMESYNOPSIS
DESCRIPTION
OPTIONS
USAGE
AUTHOR
NAME
ao-test-baro - test AltOS flight computer barometric sensor
SYNOPSIS
ao-test-baro [-T tty-device ] [--tty tty-device ] [-D altos-device ] [--device altos-device ] baro-name...
DESCRIPTION
ao-test-baro makes sure the altitude is between -50m and 3000m and temperature is between 20°C and 30°C.
OPTIONS
-T tty-device | --tty tty-device
This selects which tty device the debugger uses to communicate with the target device.
-D AltOS-device | --device AltOS-device
Search for a connected device. This requires an argument of one of the following forms:
TeleMega:2
TeleMega
2
Leaving out the product name will cause the tool to select a suitable product, leaving out the serial number will cause the tool to match one of the available devices.
USAGE
ao-test-baro opens the target device and queries the current barometric data.
AUTHOR
Keith Packard