Man page - ao-send-telem(1)
Packages contas this manual
- ao-load(1)
- ao-list(1)
- ao-usbload(1)
- ao-cal-accel(1)
- ao-dbg(1)
- ao-edit-telem(1)
- ao-test-pressure(1)
- ao-cal-freq(1)
- ao-eeprom(1)
- ao-test-baro(1)
- ao-test-igniter(1)
- ao-send-telem(1)
- ao-flash-stm32f0x(1)
- ao-flash-lpc(1)
- ao-reset-lpc(1)
- ao-dump-up(1)
- ao-flash-stm(1)
- ao-bitbang(1)
- telegps(1)
- micropeak(1)
- ao-elftohex(1)
- ao-telem(1)
- ao-test-gps(1)
- ao-makebin(1)
- ao-dumpflash(1)
- ao-flash-samd21(1)
- ao-usbtrng(1)
- ao-rawload(1)
- ao-sky-flash(1)
- altosui(1)
- ao-test-flash(1)
- ao-ejection(1)
- ao-flash-stm32f1(1)
Package: altos
apt-get install altos
apt-get install altos
Manuals in package:
Documentations in package:
Manual
| AO-SEND-TELEM(1) | General Commands Manual | AO-SEND-TELEM(1) |
NAME
ao-send-telem - Re-transmit stored telemetry file
SYNOPSIS
ao-send-telem [-T tty-device] [--tty tty-device] [-D altos-device] [--device altos-device] [-F frequency (kHz)] [--frequency frequency (kHz)] [-R] [--realtime] <flight.telem>
OPTIONS
- -T tty-device | --tty tty-device
- This selects which tty device ao-dumplog uses to communicate with the target device.
- -D AltOS-device | --device AltOS-device
- Search for a connected device. This requires an argument of one of the following forms:
- TeleDongle:2
TeleDongle
2 - Leaving out the product name will cause the tool to select a suitable product, leaving out the serial number will cause the tool to match one of the available devices.
- -F kHz | --frequency kHz
- This selects which frequency to send the specified packets on.
- -R | --realtime
- This makes the program delay between packets in pad mode. Normally, pad mode packets are sent as quickly as possible.
DESCRIPTION
ao-send-telem reads the specified flight telemetry log and re-transmits it via the specified ground station device
AUTHOR
Keith Packard
| ao-send-telem |