Man page - ccxxmake(1)
Packages contas this manual
- applycal(1)
- illumread(1)
- ls2ti3(1)
- spec2cie(1)
- extracticc(1)
- revfix(1)
- collink(1)
- refine(1)
- greytiff(1)
- chartread(1)
- specplot(1)
- tiffgamut(1)
- scanin(1)
- fakeread(1)
- viewgam(1)
- oeminst(1)
- synthread(1)
- invprofcheck(1)
- mppcheck(1)
- profcheck(1)
- xicclu(1)
- colprof(1)
- synthcal(1)
- txt2ti3(1)
- cb2ti3(1)
- mpplu(1)
- spotread(1)
- splitti3(1)
- icclu(1)
- colverify(1)
- cctiff(1)
- mppprof(1)
- dispread(1)
- extractttag(1)
- targen(1)
- printcal(1)
- cxf2ti3(1)
- dispwin(1)
- ccxxmake(1)
- dispcal(1)
- iccgamut(1)
- printtarg(1)
- timage(1)
- average(1)
- iccdump(1)
- kodak2ti3(1)
Package: argyll
apt-get install argyll
apt-get install argyll
Manuals in package:
Documentations in package:
Manual
| CREATE(1) | User Commands | CREATE(1) |
NAME
Create - Create CCMX or CCSS.
DESCRIPTION
Create CCMX or CCSS
SYNOPSIS
ccmxmake [-options] output.ccmx
-f file1.ti3[,file2.ti3] Create from one or two .ti3 files rather than measure.
- -display displayname
- Choose X11 display name
- -d n[,m]
- Choose the display n from the following list (default 1) Optionally choose different display m for VideoLUT access
- 1 name = ':0.0' 1 = 'Screen 1, Output DVI-I-1 at 0, 0, width 1920, height 1080'
- -dweb[:port]
- Display via a web server at port (default 8080)
- -p
- Use telephoto mode (ie. for a projector) (if available)
- -P ho,vo,ss[,vs]
- Position test window and scale it ho,vi: 0.0 = left/top, 0.5 = center, 1.0 = right/bottom etc. ss: 0.5 = half, 1.0 = normal, 2.0 = double etc.
- -F
- Fill whole screen with black background
- -n
- Don't set override redirect on test window
- -N
- Disable initial calibration of instrument if possible
- -H
- Use high resolution spectrum mode (if available)
- -C "command"
- Invoke shell "command" each time a color is set
- -o observ
- Choose CIE Observer for CCMX spectrometer data: 1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2
- -s steps
- Override default patch sequence combination steps (default 1)
- -W n|h|x
- Override serial port flow control: n = none, h = HW, x = Xon/Xoff
- -D [level]
- Print debug diagnostics to stderr
- -E desciption
- Override the default overall description
- -I displayname
- Set display make and model description
- -T displaytech
- Set display technology description (ie. CRT, LCD etc.)
- -U c
- Set UI selection character(s)
- -Y r|n
- Set or override refresh/non-refresh display type
- -Y R:rate
- Override measured refresh rate with rate Hz
- -Y A
- Use non-adaptive integration time mode (if available).
- correction.ccmx | calibration.ccss
- File to save result to
| September 2014 | ccmxmake |