Man page - victronups(8)

Packages contains this manual

Package:  nut-server
apt-get install nut-server

Manuals in package:
• upsd.conf(5)
• belkinunv(8)
• etapro(8)
• bcmxcp(8)
• rhino(8)
• powercom(8)
• tripplitesu(8)
• nut-recorder(8)
• oneac(8)
• mge-utalk(8)
• apcupsd-ups(8)
• nutdrv_qx(8)
• riello_ser(8)
• apcsmart-old(8)
• nut-scanner(8)
• richcomm_usb(8)
• bestfcom(8)
• nutupsdrv(8)
• dummy-ups(8)
• riello_usb(8)
• bestups(8)
• upsdrvctl(8)
• upscode2(8)
• al175(8)
• microsol-apc(8)
• blazer_ser(8)
• nutdrv_atcl_usb(8)
• clone(8)
• masterguard(8)
• blazer_usb(8)
• liebert(8)
• isbmex(8)
• nutdrv_siemens_sitop(8)
• bestuferrups(8)
• everups(8)
• tripplite_usb(8)
• genericups(8)
• bcmxcp_usb(8)
• optiups(8)
• nut-driver-enumerator(8)
• powerpanel(8)
• ups.conf(5)
• safenet(8)
• solis(8)
• bestfortress(8)
• sms_ser(8)
• apcsmart(8)
• liebert-esp2(8)
• usbhid-ups(8)
• metasys(8)
• mge-shut(8)
• upsd.users(5)
• gamatronic(8)
• tripplite(8)
• belkin(8)
• upsd(8)
• ivtscd(8)
• upsdrvsvcctl(8)
• victronups(8)
• microdowell(8)
Documentations in package:
• nut-server

Manual

VICTRONUPS

NAME
NOTE
SUPPORTED HARDWARE
CABLING
EXTRA ARGUMENTS
BUGS
AUTHORS
SEE ALSO
The core driver:
Internet resources:

---

NAME

victronups - Driver for IMV/Victron UPS unit Match, Match Lite, NetUps

NOTE

This man page only documents the hardware-specific features of the the victronups driver. For information about the core driver, see nutupsdrv (8).

SUPPORTED HARDWARE

The victronups driver should recognize all Victron models that use a serial protocol at 1200 bps. These include Match Lite, Match and the NetUps line.

The Match Lite line may only report a handful of variables. This is usually not a bug - they just don’t support anything else.

CABLING

If your Victron cable is broken or missing, use this diagram to build a clone:

• https://github.com/networkupstools/nut/blob/master/docs/cables/ge-imv-victron.txt

• docs/cables/ge-imv-victron.txt

EXTRA ARGUMENTS

This driver supports the following optional setting in the ups.conf (5):

modelname = name

Set model name

usd = delay

Set delay before shutdown on UPS

BUGS

The protocol for this UPS is not officially documented.

AUTHORS

• Radek Benedikt <benedikt@lphard.cz>

• Daniel Prynych <Daniel.Prynych@hornet.cz>

SEE ALSO

The core driver:

nutupsdrv (8)

Internet resources:

The NUT (Network UPS Tools) home page: https://www.networkupstools.org/

---