Man page - smpdump(8)
Packages contains this manual
- ibswitches(8)
- ibcacheedit(8)
- check_lft_balance(8)
- ibsysstat(8)
- vendstat(8)
- ibstat(8)
- perfquery(8)
- smpdump(8)
- ibportstate(8)
- iblinkinfo(8)
- ibrouters(8)
- ibqueryerrors(8)
- ibstatus(8)
- ibhosts(8)
- ibidsverify(8)
- sminfo(8)
- ibnetdiscover(8)
- dump_lfts(8)
- ibccconfig(8)
- ibping(8)
- ibfindnodesusing(8)
- ibaddr(8)
- ibnodes(8)
- infiniband-diags(8)
- ibtracert(8)
- saquery(8)
- smpquery(8)
- ibccquery(8)
- dump_fts(8)
- ibroute(8)
- dump_mfts(8)
apt-get install infiniband-diags
Manual
SMPDUMP
NAMESYNOPSIS
DESCRIPTION
OPTIONS
Addressing Flags
Port Selection flags
Local port Selection
Debugging flags
Configuration flags
FILES
CONFIG FILE
EXAMPLES
SEE ALSO
AUTHOR
NAME
smpdump - dump InfiniBand subnet management attributes
SYNOPSIS
smpdump [options] <dlid|dr_path> <attribute> [attribute_modifier]
DESCRIPTION
smpdump is a general purpose SMP utility which gets SM attributes from a specified SMA. The result is dumped in hex by default.
OPTIONS
dlid|drpath
LID or DR path to SMA
attribute
IBA attribute ID for SM attribute
attribute_modifier
IBA modifier for SM attribute
-s, --string
Print strings in packet if possible
Addressing Flags
-D, --Direct The address specified is a directed route
Examples:
[options] -D [options] "0" # self port
[options] -D [options] "0,1,2,1,4" # out via port
1, then 2, ...
(Note the
second number in the path specified must match the port
being
used. This can be specified using the port selection flag
'-P' or the
port found through the automatic selection process.)
-L, --Lid The address specified is a LID
Port Selection flags
-C, --Ca <ca_name> use the specified ca_name.
-P, --Port <ca_port> use the specified ca_port.
Local port Selection
Multiple port/Multiple CA support: when no IB device or port is specified (see the "local umad parameters" below), the libibumad library selects the port to use by the following criteria:
|
1. |
the first port that is ACTIVE. |
|||
|
2. |
if not found, the first port that is UP (physical link up). |
If a port and/or CA name is specified, the libibumad library attempts to fulfill the user request, and will fail if it is not possible.
For example:
ibaddr # use
the first port (criteria #1 above)
ibaddr -C mthca1 # pick the best port from
"mthca1" only.
ibaddr -P 2 # use the second (active/up) port from the first
available IB device.
ibaddr -C mthca0 -P 2 # use the specified port only.
Debugging flags
|
-d |
raise the IB debugging level. May be used several times (-ddd or -d -d -d). |
||
|
-e |
show send and receive errors (timeouts and others) |
-h,
--help
show the usage message
-v, --verbose
increase the application verbosity level. May be used several times (-vv or -v -v -v)
-V, --version show the version info.
Configuration flags
-t, --timeout <timeout_ms> override the default timeout for the solicited mads.
--config, -z <config_file> Specify alternate config file.
Default: /etc/infiniband-diags/ibdiag.conf
FILES
CONFIG FILE
/etc/infiniband-diags/ibdiag.conf
A global config file is provided to set some of the common options for all tools. See supplied config file for details.
EXAMPLES
Direct Routed Examples
|
:: |
smpdump -D 0,1,2,3,5 16 # NODE DESC smpdump -D 0,1,2 0x15 2 # PORT INFO, port 2 |
LID Routed Examples
|
:: |
smpdump 3 0x15 2 # PORT INFO, lid 3 port 2 smpdump 0xa0 0x11 # NODE INFO, lid 0xa0 |
SEE ALSO
smpquery (8)
AUTHOR
Hal Rosenstock
< <halr@voltaire.com> >