Man page - pmh7tool(8)

Packages contains this manual

Package:  coreboot-utils
apt-get install coreboot-utils

Manuals in package:
• ifdtool(8)
• bucts(8)
• msrtool(8)
• inteltool(8)
• ifittool(8)
• intelvbttool(8)
• rmodtool(8)
• intelmetool(8)
• elogtool(8)
• cbmem(8)
• cbfs-compression-tool(8)
• ectool(8)
• cbfstool(8)
• superiotool(8)
• fmaptool(8)
• pmh7tool(8)
• ifwitool(8)
• nvramtool(8)
Documentations in package:
• coreboot-utils

Manual

PMH7TOOL

NAME
SYNOPSIS
DESCRIPTION
Attention!
OPTIONS
NOTES
AUTHORS

---

NAME

pmh7tool - read and write to pmh7 registers

SYNOPSIS

pmh7tool [-d]
pmh7tool [-r] <addr>
pmh7tool [-w] <addr> <data>
pmh7tool [-b | -c | -s] <addr> <bit>
pmh7tool [-h]

DESCRIPTION

Read and write to pmh7 registers at base address 0x15e0

Attention!

Writing to PMH7 registers is very dangerous, as you directly manipulate the power rails, enable lines, interrupt lines or something else of the device. Proceed with caution.

OPTIONS

-h , --help :

Print this help

-d , --dump :

Print registers

-r , --read <addr>:

Read from register at <addr>.

-b , --read-bit <addr> <bit>

Read bit from register at <addr>

-w , --write <addr> <data>

Write <data> to register at <addr>

-c , --clear-bit <addr> <bit>

Clear bit from register at <addr>

-s , --set-bit <addr> <bit>

Set bit at on register at <addr>

NOTES

<addr> must be in the range of 0-0x1ff
<data> must be in the range of 0-0xff
<bit> must be in the range of 0-7

AUTHORS

coresystems GmbH.
Man page written by Ahmad Khalifa.

---