Man page - fence_virt(8)

Packages contains this manual

Package: fence-virt
apt-get install fence-virt

Manuals in package:

Documentations in package:

fence-virt

Manual

FENCE_AGENT

NAME
DESCRIPTION
PARAMETERS
ACTIONS
STDIN PARAMETERS

NAME

fence_virt - Fence agent for virtual machines

DESCRIPTION

fence_virt is a Power Fencing agent which can be used with virtual machines.

NOTE: reboot-action does not power on nodes that are powered off.

The fence agent accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. The agent can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts.

Vendor URL: https://libvirt.org

PARAMETERS

	-d		Specify (stdin) or increment (command line) debug level
	-D		Serial device (default=/dev/ttyS1) (Default Value: /dev/ttyS1)
	-P		Serial Parameters (default=115200,8N1) (Default Value: 115200,8N1)
	-A		VM Channel IP address (default=10.0.2.179) (Default Value: 10.0.2.179)
	-p		TCP, Multicast, VMChannel, or VM socket port (default=1229) (Default Value: 1229)
	-n		Virtual Machine (domain name) to fence This parameter is always required.
	-o		Fencing action (null, off, on, [reboot], status, list, list-status, monitor, validate-all, metadata) (Default Value: reboot)
	-t		Fencing timeout (in seconds; default=30) (Default Value: 30)
	-T		IP address to connect to in TCP mode (default=127.0.0.1 / ::1) (Default Value: 127.0.0.1)
	-S		vm socket CID to connect to in vsock mode (Default Value: 2)
	-C		Authentication (none, sha1, [sha256], sha512) (Default Value: sha256)
	-c		Packet hash strength (none, sha1, [sha256], sha512) (Default Value: sha256)
	-k		Shared key file (default=/etc/cluster/fence_xvm.key) (Default Value: /etc/cluster/fence_xvm.key)
	-w		Fencing delay (in seconds; default=0) (Default Value: 0)

ACTIONS

null

The operational behavior of this is not known.

	on		Power on machine.
	off		Power off machine.
	reboot		Reboot machine.

metadata

Display the XML metadata describing this resource.

status

This returns the status of the plug/virtual machine.

monitor

Check the health of fence device

list

List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise.

list-status

List available plugs with aliases/virtual machines and their power state if it can be obtained without additional commands.

validate-all

Validate if all required parameters are entered.

STDIN PARAMETERS

debug

Specify (stdin) or increment (command line) debug level

serial_device

Serial device (default=/dev/ttyS1) (Default Value: /dev/ttyS1)

serial_params

Serial Parameters (default=115200,8N1) (Default Value: 115200,8N1)

channel_address

VM Channel IP address (default=10.0.2.179) (Default Value: 10.0.2.179)

	ipport		TCP, Multicast, VMChannel, or VM socket port (default=1229) (Default Value: 1229)
	plug		Virtual Machine (domain name) to fence This parameter is always required. Obsoletes: port
	action		Fencing action (null, off, on, [reboot], status, list, list-status, monitor, validate-all, metadata) (Default Value: reboot)

timeout

Fencing timeout (in seconds; default=30) (Default Value: 30)

	ipaddr		IP address to connect to in TCP mode (default=127.0.0.1 / ::1) (Default Value: 127.0.0.1)
	vsock		vm socket CID to connect to in vsock mode (Default Value: 2)
	auth		Authentication (none, sha1, [sha256], sha512) (Default Value: sha256)
	hash		Packet hash strength (none, sha1, [sha256], sha512) (Default Value: sha256)

key_file

Shared key file (default=/etc/cluster/fence_xvm.key) (Default Value: /etc/cluster/fence_xvm.key)

delay

Fencing delay (in seconds; default=0) (Default Value: 0)