Man page - rpma_log_set_threshold(3)

Packages contas this manual

Package: librpma-dev
apt-get install librpma-dev

Manuals in package:

Documentations in package:

librpma-dev

Manual

rpma_log_set_threshold(3)

RPMA Programmer's Manual

rpma_log_set_threshold(3)

NAME

rpma_log_set_threshold - set the logging threshold level

SYNOPSIS



      #include <librpma.h>


      int rpma_log_set_threshold(enum rpma_log_threshold threshold, enum rpma_log_level level);


      enum rpma_log_level {


              RPMA_LOG_DISABLED,


              RPMA_LOG_LEVEL_FATAL,


              RPMA_LOG_LEVEL_ERROR,


              RPMA_LOG_LEVEL_WARNING,


              RPMA_LOG_LEVEL_NOTICE,


              RPMA_LOG_LEVEL_INFO,


              RPMA_LOG_LEVEL_DEBUG,


      };


      enum rpma_log_threshold {


              RPMA_LOG_THRESHOLD,


              RPMA_LOG_THRESHOLD_AUX,


              RPMA_LOG_THRESHOLD_MAX


      };

DESCRIPTION

rpma_log_set_threshold() sets the logging threshold level.

Available thresholds are:

RPMA_LOG_THRESHOLD - the main threshold used to filter out undesired logging messages. Messages on a higher level than the primary threshold level are ignored. RPMA_LOG_DISABLED shall be used to suppress logging. The default value is RPMA_LOG_WARNING.
RPMA_LOG_THRESHOLD_AUX - the auxiliary threshold intended for use inside the logging function (please see rpma_log_get_threshold(3)). The logging function may or may not take this threshold into consideration. The default value is RPMA_LOG_DISABLED.

Available threshold levels are defined by enum rpma_log_level:

RPMA_LOG_DISABLED - all messages will be suppressed
RPMA_LOG_LEVEL_FATAL - an error that causes the library to stop working immediately
RPMA_LOG_LEVEL_ERROR - an error that causes the library to stop working properly
RPMA_LOG_LEVEL_WARNING - an error that could be handled in the upper level
RPMA_LOG_LEVEL_NOTICE - non-massive info mainly related to public API function completions e.g. connection established
RPMA_LOG_LEVEL_INFO - massive info e.g. every write operation indication
RPMA_LOG_LEVEL_DEBUG - debug info e.g. write operation dump

THE DEFAULT LOGGING FUNCTION

The default logging function writes messages to syslog(3) and to stderr(3), where syslog(3) is the primary destination (RPMA_LOG_THRESHOLD applies) whereas stderr(3) is the secondary destination (RPMA_LOG_THRESHOLD_AUX applies).

RETURN VALUE

rpma_log_syslog_set_threshold() function returns 0 on success or a negative error code on failure.

ERRORS

rpma_log_set_threshold() can fail with the following errors:

RPMA_E_INVAL - threshold is not RPMA_LOG_THRESHOLD nor RPMA_LOG_THRESHOLD_AUX
RPMA_E_INVAL - level is not a value defined by enum rpma_log_level type
RPMA_E_AGAIN - a temporary error occurred, the retry may fix the problem