Man page - nozzle_add_ip(3)
Packages contains this manual
- knet_host_add(3)
- knet_log_get_subsystem_id(3)
- nozzle_set_up(3)
- knet_handle_get_transport_reconnect_interval(3)
- knet_host_remove(3)
- knet_link_set_enable(3)
- knet_handle_pmtud_setfreq(3)
- knet_link_get_link_list(3)
- knet_link_get_priority(3)
- knet_handle_crypto_set_config(3)
- knet_get_transport_name_by_id(3)
- knet_send_sync(3)
- nozzle_get_mac(3)
- knet_log_get_loglevel(3)
- nozzle_get_mtu(3)
- knet_host_get_id_by_host_name(3)
- knet_handle_get_datafd(3)
- nozzle_reset_mtu(3)
- knet_link_get_config(3)
- knet_handle_remove_datafd(3)
- knet_strtoaddr(3)
- knet_handle_new(3)
- knet_handle_new_ex(3)
- knet_handle_enable_filter(3)
- knet_handle_crypto_use_config(3)
- knet_handle_enable_access_lists(3)
- nozzle_set_down(3)
- knet_host_get_host_list(3)
- knet_link_get_status(3)
- nozzle_set_mac(3)
- knet_log_set_loglevel(3)
- knet_recv(3)
- knet_link_set_priority(3)
- nozzle_get_ips(3)
- nozzle_get_handle_by_name(3)
- knet_send(3)
- knet_handle_get_stats(3)
- knet_handle_setfwd(3)
- nozzle_open(3)
- knet_host_get_name_by_host_id(3)
- knet_link_get_enable(3)
- knet_handle_pmtud_set(3)
- knet_log_get_subsystem_name(3)
- knet_host_get_status(3)
- knet_handle_enable_pmtud_notify(3)
- knet_link_set_pong_count(3)
- knet_handle_set_transport_reconnect_interval(3)
- knet_link_get_ping_timers(3)
- nozzle_run_updown(3)
- knet_get_transport_id_by_name(3)
- nozzle_get_name_by_handle(3)
- knet_link_clear_acl(3)
- knet_handle_clear_stats(3)
- knet_host_set_name(3)
- knet_handle_crypto(3)
- nozzle_del_ip(3)
- knet_link_add_acl(3)
- knet_link_clear_config(3)
- knet_host_set_policy(3)
- knet_handle_add_datafd(3)
- knet_handle_pmtud_get(3)
- knet_handle_pmtud_getfreq(3)
- knet_link_set_ping_timers(3)
- knet_get_transport_list(3)
- knet_handle_enable_sock_notify(3)
- nozzle_set_mtu(3)
- knet_link_insert_acl(3)
- knet_host_get_policy(3)
- nozzle_reset_mac(3)
- knet_get_crypto_list(3)
- nozzle_add_ip(3)
- knet_log_get_loglevel_id(3)
- knet_handle_crypto_rx_clear_traffic(3)
- nozzle_close(3)
- knet_log_get_loglevel_name(3)
- knet_link_set_config(3)
- knet_link_get_pong_count(3)
- nozzle_get_fd(3)
- knet_handle_free(3)
- knet_handle_get_channel(3)
- knet_addrtostr(3)
- knet_handle_compress(3)
- knet_host_enable_status_change_notify(3)
- knet_link_rm_acl(3)
- knet_get_compress_list(3)
apt-get install libknet-doc
Manual
NOZZLE_ADD_IP
NAMESYNOPSIS
DESCRIPTION
RETURN VALUE
SEE ALSO
COPYRIGHT
NAME
nozzle_add_ip - equivalent of ip addr or ifconfig <ipaddress/prefix>
SYNOPSIS
#include <libnozzle.h>
int
nozzle_add_ip
(
nozzle_t
nozzle
,
const char *
ipaddr
,
const char *
prefix
);
DESCRIPTION
nozzle_add_ip
nozzle - pointer to the nozzle struct
ipaddr - string containing either an IPv4 or an IPv6 address. Please note that Linux will automatically remove any IPv6 addresses from an interface with MTU < 1280. libnozzle will cache those IPs and re-instate them when MTU is > 1280. MTU must be set via nozzle_set_mtu for IPv6 to be re-instated.
prefix - 24, 64 or any valid network prefix for the requested address.
RETURN VALUE
0 on success -1 on error and errno is set.
SEE ALSO
nozzle_close (3), nozzle_set_mtu (3), nozzle_get_fd (3), nozzle_get_mtu (3), nozzle_reset_mtu (3), nozzle_set_up (3), nozzle_get_ips (3), nozzle_set_down (3), nozzle_reset_mac (3), nozzle_get_handle_by_name (3), nozzle_run_updown (3), nozzle_open (3), nozzle_del_ip (3), nozzle_get_mac (3), nozzle_set_mac (3), nozzle_get_name_by_handle (3),
COPYRIGHT
Copyright (C) 2010-2025 Red Hat, Inc. All rights reserved.