Man page - jpcunpack(3)

Packages contains this manual

Package: libg2c-dev
apt-get install libg2c-dev

Manuals in package:

Documentations in package:

libg2c-dev

Manual

grib2_int.h

NAME

grib2_int.h - Header file with internal function prototypes NCEPLIBS-g2c library.

SYNOPSIS

#include <assert.h> #include <ctype.h> #include <stdint.h> #include <stdio.h> #include <stdlib.h> #include <errno.h> #include <arpa/inet.h> #include ’grib2.h’

Data Structures

struct g2c_code_table
A GRIB2 code table.
struct g2c_dim_info
Keep information about dimensions defined in section 3.
struct g2c_entry
An entry in a GRIB2 code table.
struct g2c_file_info
This is the information about each open file.
struct g2c_message_info
This is the information about each message.
struct g2c_param
An entry in the table of NOAA abbreviations for GRIB parameters.
struct g2c_section3_info
Information about Section 3 GRID DEFINITION SECTION .
struct g2c_section4_info
Information about Section 4 PRODUCT DEFINITION SECTION .
struct g2c_section5_info
Information about Section 5 DATA REPRESENTATION SECTION .
struct g2c_section6_info
Information about Section 6 BIT-MAP SECTION .
struct g2c_section_info
Information about a section 3 through 7 in a GRIB2 message.
struct gtemplate
Struct for GRIB template, returned by getgridtemplate() .

Macros

#define ALOG2 (0.69314718)
ln(2.0)
#define BYTE 8
Number of bits in a byte.
#define EIGHT_BYTES 8
Eight bytes.
#define EXTERN_MUTEX (m)
Pthreads not enabled, so do nothing.
#define FOUR_BYTES 4
Four bytes.
#define G2C_FILE_READ 0
Read.
#define G2C_FILE_WRITE 1
Write.
#define G2C_INDEX1_BDS_VAL_LEN 10
Length of the binary data section (bds) in index file.
#define G2C_INDEX1_BMS_VAL_LEN 5
Length of the bitmap section (bms) in index file.
#define G2C_INDEX1_GDS_VAL2_LEN 27
Length of the gds in index file.
#define G2C_INDEX1_GDS_VAL_LEN 41
Length of the grid definition section (gds) in index file.
#define G2C_INDEX1_PDS_VAL2_LEN 27
Length of the pds 2 section in the index file.
#define G2C_INDEX1_PDS_VAL3_LEN 27
Length of the pds 3 section in the index file.
#define G2C_INDEX1_PDS_VAL_LEN 27
Length of the product definition section (pds) in index file.
#define G2C_JASPER_JPEG_FORMAT_NAME ’jpc’
Name of JPEG codec in Jasper.
#define G2C_MAGIC_HEADER ’GRIB’
GRIB magic header string.
#define G2C_MAGIC_HEADER_LEN 8
Full length of magic header string (includes GRIB version byte).
#define G2C_MAX_MESSAGES 1024
Maximum number of messages in a file.
#define G2C_MIN_MAX_BYTES 16
Minimum acceptable value for max_bytes parameter of g2c_get_msg() .
#define hton64 (y) (((uint64_t)htonl(y)) << WORD | htonl(y >> WORD ))
Byte swap 64-bit ints.
#define LATITUDE ’Latitude’
Latitude.
#define LOG (e)
Ignore logging to stdout.
#define LONGITUDE ’Longitude’
Longitude.
#define MUTEX (m)
Pthreads not enabled, so do nothing.
#define MUTEX_LOCK (m)
Pthreads not enabled, so do nothing.
#define MUTEX_UNLOCK (m)
Pthreads not enabled, so do nothing.
#define ntoh64 (y) (((uint64_t)ntohl(y)) << WORD | ntohl(y >> WORD ))
Byte swap 64-bit ints.
#define ONE_BYTE 1
One byte.
#define TWO_BYTES 2
Two bytes.
#define WORD 32
Number of bits in four bytes.

Typedefs

typedef struct g2c_entry G2C_CODE_ENTRY_T
An entry in a GRIB2 code table.
typedef struct g2c_code_table G2C_CODE_TABLE_T
A GRIB2 code table.
typedef struct g2c_dim_info G2C_DIM_INFO_T
Keep information about dimensions defined in section 3.
typedef struct g2c_file_info G2C_FILE_INFO_T
This is the information about each open file.
typedef struct g2c_message_info G2C_MESSAGE_INFO_T
This is the information about each message.
typedef struct g2c_param G2C_PARAM_T
An entry in the table of NOAA abbreviations for GRIB parameters.
typedef struct g2c_section3_info G2C_SECTION3_INFO_T
Information about Section 3 GRID DEFINITION SECTION .
typedef struct g2c_section4_info G2C_SECTION4_INFO_T
Information about Section 4 PRODUCT DEFINITION SECTION .
typedef struct g2c_section5_info G2C_SECTION5_INFO_T
Information about Section 5 DATA REPRESENTATION SECTION .
typedef struct g2c_section6_info G2C_SECTION6_INFO_T
Information about Section 6 BIT-MAP SECTION .
typedef struct g2c_section_info G2C_SECTION_INFO_T
Information about a section 3 through 7 in a GRIB2 message.
typedef struct gtemplate gtemplate
Struct for GRIB template.

Functions

int add_msg ( G2C_FILE_INFO_T *file, int msg_num, size_t bytes_to_msg, size_t bytes_in_msg, int read_file, G2C_MESSAGE_INFO_T **msg)
Add new message to linked list.
int add_section (FILE *f, G2C_MESSAGE_INFO_T *msg, int sec_id, unsigned int sec_len, size_t bytes_to_sec, unsigned char sec_num)
Add metadata about a new section 3, 4, 5, 6, or 7.
void aecpack (float *fld, g2int width, g2int height, g2int *idrstmpl, unsigned char *cpack, g2int *lcpack)
This function packs up a float array into a AEC code stream.
g2int aecunpack (unsigned char *cpack, g2int len, g2int *idrstmpl, g2int ndpts, float *fld)
Unpack AEC compressed data into an array of floats, using info from the GRIB2 Data Representation Template 5.42 .
void cmplxpack (float *fld, g2int ndpts, g2int idrsnum, g2int *idrstmpl, unsigned char *cpack, g2int *lcpack)
Pack up a data field using a complex packing algorithm.
void compack (float *fld, g2int ndpts, g2int idrsnum, g2int *idrstmpl, unsigned char *cpack, g2int *lcpack)
Pack a data field using a complex packing algorithm.
int comunpack (unsigned char *cpack, g2int lensec, g2int idrsnum, g2int *idrstmpl, g2int ndpts, float *fld)
Unpack a data field that was packed using a complex packing algorithm, using info from the GRIB2 Data Representation Template 5.2 or Template 5.3 .
int dec_aec (unsigned char *cpack, g2int len, g2int nbits, g2int flags, g2int block_size, g2int rsi, unsigned char *cfld, g2int cfldlen)
Decode an AEC code stream specified in the CCSDS 121.0-B-3 Blue Book .
int dec_jpeg2000 (char *injpc, g2int bufsize, g2int *outfld)
Decode a JPEG2000 code stream specified in the JPEG2000 Part-1 standard (i.e., ISO/IEC 15444-1) using JasPer Software .
int dec_png (unsigned char *pngbuf, g2int *width, g2int *height, unsigned char *cout)
Decode PNG.
int enc_aec (unsigned char *data, g2int ctemplen, g2int nbits, g2int flags, g2int block_size, g2int rsi, unsigned char *aecbuf, g2int *aecbuflen)
Encode data into an AEC code stream specified in the CCSDS 121.0-B-3 Blue Book .
int enc_jpeg2000 (unsigned char *cin, g2int width, g2int height, g2int nbits, g2int ltype, g2int ratio, g2int retry, char *outjpc, g2int jpclen)
Encode a grayscale image into a JPEG2000 code stream specified in the JPEG2000 Part-1 standard (i.e., ISO/IEC 15444-1) using JasPer Software .
int enc_png (unsigned char *data, g2int width, g2int height, g2int nbits, unsigned char *pngbuf)
Encode PNG.
gtemplate * extdrstemplate ( g2int number, g2int *list)
This subroutine generates the remaining octet map for a given Data Representation Template, if required.
gtemplate * extgridtemplate ( g2int number, g2int *list)
This subroutine generates the remaining octet map for a given Grid Definition Template, if required.
gtemplate * extpdstemplate ( g2int number, g2int *list)
This subroutine generates the remaining octet map for a given Product Definition Template, if required.
int g2c_add_file (const char *path, int mode, int *g2cid)
Open a GRIB2 file and add it to the list of open files.
int g2c_check_msg (unsigned char *cgrib, g2int *lencurr, int verbose)
Check for ’GRIB’ at the beginning of a GRIB message, and check to see if the message is already terminated with ’7777’.
int g2c_file_io (FILE *f, int write, int g2ctype, void *var)
Read or write a big-endian integer type to an open file, with conversion between native and big-endian format.
int g2c_file_io_byte (FILE *f, int write, char *var)
Read or write a big-endian signed byte to an open GRIB2 file, with conversion between native and big-endian format, and special GRIB2 handling of negative numbers.
int g2c_file_io_int (FILE *f, int write, int *var)
Read or write a big-endian 4-byte signed int to an open GRIB2 file, with conversion between native and big-endian format, and special GRIB2 handling of negative numbers.
int g2c_file_io_longlong (FILE *f, int write, long long *var)
Read or write a big-endian signed long long to an open GRIB2 file, with conversion between native and big-endian format, and special GRIB2 handling of negative numbers.
int g2c_file_io_short (FILE *f, int write, short *var)
Read or write a big-endian signed short to an open GRIB2 file, with conversion between native and big-endian format, and special GRIB2 handling of negative numbers.
int g2c_file_io_template (FILE *f, int rw_flag, int map, long long int *template_value)
Read or write a big-endian 4-byte int or unsigned int from or to an open file, with conversion between native and big-endian format, and handling of GRIB negative numbers.
int g2c_file_io_ubyte (FILE *f, int write, unsigned char *var)
Read or write a big-endian unsigned byte to an open GRIB2 file, with conversion between native and big-endian format.
int g2c_file_io_uint (FILE *f, int write, unsigned int *var)
Read or write a big-endian 4-byte unsigned int to an open GRIB2 file, with conversion between native and big-endian format.
int g2c_file_io_ulonglong (FILE *f, int write, unsigned long long *var)
Read or write a big-endian unsigned long long to an open GRIB2 file, with conversion between native and big-endian format.
int g2c_file_io_ushort (FILE *f, int write, unsigned short *var)
Read or write a big-endian unsigned short to an open GRIB2 file, with conversion between native and big-endian format.
int g2c_get_datetime (int ipdtn, long long int *ipdtmpl, short year, unsigned char month, unsigned char day, unsigned char hour, unsigned char minute, unsigned char second, char *tabbrev)
Convert date and time from GRIB2 info to string output.
int g2c_get_level_desc (int ipdtn, long long int *ipdtmpl, char *level_desc)
Determine the string that describes the level information, given the GRIB2 Product Definition Template information.
int g2c_log_section1 ( G2C_MESSAGE_INFO_T *msg)
Log section 0 information.
int g2c_rw_section1_metadata (FILE *f, int rw_flag, G2C_MESSAGE_INFO_T *msg)
Read Section 1.
int g2c_rw_section3_metadata (FILE *f, int rw_flag, G2C_SECTION_INFO_T *sec)
Read the metadata from section 3 (Grid Definition Section) of a GRIB2 message.
int g2c_rw_section4_metadata (FILE *f, int rw_flag, G2C_SECTION_INFO_T *sec)
Read or write the metadata from section 4 (Product Definition Section) of a GRIB2 message.
int g2c_rw_section5_metadata (FILE *f, int rw_flag, G2C_SECTION_INFO_T *sec)
Read or write the metadata from section 5 (Data Representation Section) of a GRIB2 message.
int g2c_rw_section6_metadata (FILE *f, int rw_flag, G2C_SECTION_INFO_T *sec)
Read or write the metadata from section 6 (Data Representation Section) of a GRIB2 message.
void gbit (unsigned char *in, g2int *iout, g2int iskip, g2int nbits)
Get arbitrary size values from a packed bit string, right justifying each value in the unpacked iout array.
void gbits (unsigned char *in, g2int *iout, g2int iskip, g2int nbits, g2int nskip, g2int n)
Unpack arbitrary size values from a packed bit string, right justifying each value in the unpacked iout array.
g2int getdim (unsigned char *csec3, g2int *width, g2int *height, g2int *iscan)
Return the dimensions and scanning mode of a grid definition.
gtemplate * getdrstemplate ( g2int number)
This subroutine returns DRS template information for a specified Data Representation Template.
gtemplate * getgridtemplate ( g2int number)
This subroutine returns grid template information for a specified Grid Definition Template for [Section 3 - the Grid Definition Section (GDS)](https://www.nco.ncep.noaa.gov/pmb/docs/grib2/grib2_doc/grib2_sect3.shtml).
gtemplate * getpdstemplate ( g2int number)
This subroutine returns PDS template information for a specified Product Definition Template.
g2int getpoly (unsigned char *csec3, g2int *jj, g2int *kk, g2int *mm)
This subroutine returns the J, K, and M pentagonal resolution parameters specified in a GRIB Grid Definition Section (GDS) used spherical harmonic coefficients using GDT 5.50 through 5.53.
double int_power (double x, g2int y)
Function similar to C pow() power function.
void jpcpack (float *fld, g2int width, g2int height, g2int *idrstmpl, unsigned char *cpack, g2int *lcpack)
This function packs up a float array into a JPEG2000 code stream.
g2int jpcunpack (unsigned char *cpack, g2int len, g2int *idrstmpl, g2int ndpts, float *fld)
Unpack JPEG2000 compressed data into an array of floats, using info from the GRIB2 Data Representation Template 5.40 or 5.40000.
void misspack (float *fld, g2int ndpts, g2int idrsnum, g2int *idrstmpl, unsigned char *cpack, g2int *lcpack)
Pack a data field using a complex packing algorithm.
void mkieee (float *a, g2int *rieee, g2int num)
Store a list of real values in 32-bit IEEE floating point format.
int pack_gp ( g2int *kfildo, g2int *ic, g2int *nxy, g2int *is523, g2int *minpk, g2int *inc, g2int *missp, g2int *misss, g2int *jmin, g2int *jmax, g2int *lbit, g2int *nov, g2int *ndg, g2int *lx, g2int *ibit, g2int *jbit, g2int *kbit, g2int *novref, g2int *lbitref, g2int *ier)
Determines groups of variable size, but at least of size minpk, the associated max (jmax( )) and min (jmin( )), the number of bits necessary to hold the values in each group (lbit( )), the number of values in each group (nov( )), the number of bits necessary to pack the jmin( ) values (ibit), the number of bits necessary to pack the lbit( ) values (jbit), and the number of bits necessary to pack the nov( ) values (kbit).
void pngpack (float *fld, g2int width, g2int height, g2int *idrstmpl, unsigned char *cpack, g2int *lcpack)
This subroutine packs up a float data field into PNG image format.
g2int pngunpack (unsigned char *cpack, g2int len, g2int *idrstmpl, g2int ndpts, float *fld)
This subroutine unpacks a data field that was packed into a PNG image format using info from the GRIB2 Data Representation Template 5.41 or 5.40010.
void rdieee ( g2int *rieee, float *a, g2int num)
Read a list of real values in 32-bit IEEE floating point format.
void sbit (unsigned char *out, g2int *in, g2int iskip, g2int nbits)
Store arbitrary size values into a packed bit string, taking the low order bits from each value in the unpacked array.
void sbits (unsigned char *out, g2int *in, g2int iskip, g2int nbits, g2int nskip, g2int n)
Store arbitrary size values into a packed bit string, taking the low order bits from each value in the unpacked array.
void simpack (float *fld, g2int ndpts, g2int *idrstmpl, unsigned char *cpack, g2int *lcpack)
Packs a data field using the simple packing algorithm.
g2int simunpack (unsigned char *cpack, g2int *idrstmpl, g2int ndpts, float *fld)
Unpack a data field that was packed using a simple packing algorithm, using info from the GRIB2 Data Representation Template 5.0.
void specpack (float *fld, g2int ndpts, g2int JJ, g2int KK, g2int MM, g2int *idrstmpl, unsigned char *cpack, g2int *lcpack)
Pack a spectral data field using the complex packing algorithm for spherical harmonic data as defined in the GRIB2 Data Representation Template 5.51 .
g2int specunpack (unsigned char *cpack, g2int *idrstmpl, g2int ndpts, g2int JJ, g2int KK, g2int MM, float *fld)
Unpack a spectral data field that was packed using the complex packing algorithm for spherical harmonic data as defined in the GRIB2 documention, using info from the GRIB2 Data Representation Template 5.51 .

Detailed Description

Header file with internal function prototypes NCEPLIBS-g2c library.

Author

Ed Hartnett

Date

2021-11-08

Definition in file grib2_int.h .

Data Type Documentation

struct g2c_code_table

A GRIB2 code table.

Definition at line 256 of file grib2_int.h .

Data Fields:

G2C_CODE_ENTRY_T * entry

struct g2c_code_table * next

char title[ G2C_MAX_GRIB_TITLE_LEN +1]

struct g2c_dim_info

Keep information about dimensions defined in section 3.

Definition at line 185 of file grib2_int.h .

Data Fields:

int dimid Dimension ID.

size_t len Length of dimension.

char name[ G2C_MAX_NAME +1] Name of dimension.

float * value Array of dimension values.

struct g2c_entry

An entry in a GRIB2 code table.

Definition at line 247 of file grib2_int.h .

Data Fields:

char code[ G2C_MAX_GRIB_CODE_LEN +1]

char desc[ G2C_MAX_GRIB_DESC_LEN +1]

struct g2c_entry * next

char status[ G2C_MAX_GRIB_STATUS_LEN +1]

struct g2c_file_info

This is the information about each open file.

Definition at line 237 of file grib2_int.h .

Data Fields:

FILE * f FILE pointer to open file.

int g2cid ID of the file.

G2C_MESSAGE_INFO_T * msg Information about each message in the file.

size_t num_messages Number of messages in the file.

char path[ G2C_MAX_NAME +1] Path of the file.

struct g2c_message_info

This is the information about each message.

Definition at line 135 of file grib2_int.h .

Data Fields:

size_t bytes_in_msg Number of bytes in this message.

size_t bytes_to_bms Number of bytes in the message to the bitmap section.

size_t bytes_to_data Number of bytes in the message to the (first) data section.

size_t bytes_to_local Number of bytes in the message before the (first) local section.

size_t bytes_to_msg Number of bytes to skip in the file, to get to this message.

short center Originating center.

unsigned char day Day.

unsigned char discipline Discipline from section 0.

struct g2c_file_info * file Pointer to containing file.

unsigned char hour Hour.

unsigned char local_version Version number of GRIB local tables used to augment Master Tables.

unsigned char master_version GRIB master tables version number.

unsigned char minute Minute.

unsigned char month Month.

size_t msg_num Number of message in file (0-based).

struct g2c_message_info * next Pointer to next in list.

int num_fields Number of fields in the message.

int num_local Number of local sections in the message.

int num_sections Number of sections in the file.

struct g2c_section_info * sec List of section metadata.

int sec1_len Length of section 1.

unsigned char second Second.

int section1[ G2C_SECTION1_ARRAY_LEN ] Section 1 array.

int * section_number Array (length num_sections) of section numbers.

size_t * section_offset Array (length num_sections) of byte offsets from start of message to section.

unsigned char sig_ref_time Significance of reference time.

unsigned char status Production Status of Processed data in the GRIB message.

short subcenter Originating subcenter.

unsigned char type Type of processed data in this GRIB message.

short year Year.

struct g2c_param

An entry in the table of NOAA abbreviations for GRIB parameters.

Definition at line 264 of file grib2_int.h .

Data Fields:

char abbrev[ G2C_MAX_NOAA_ABBREV_LEN +1] NOAA abbreviation for this parameter.

int g1num GRIB1 parameter number.

int g1ver GRIB1 table version.

int g2cat GRIB2 category number.

int g2disc GRIB2 discipline.

int g2num GRIB2 parameter number.

struct g2c_section3_info

Information about Section 3 GRID DEFINITION SECTION .

Definition at line 195 of file grib2_int.h .

Data Fields:

G2C_DIM_INFO_T dim[2] Dimension information.

unsigned short grid_def Grid definition template number (= N) (See Table 3.1).

unsigned char interp_list Interpetation of list of numbers defining number of points (See Table 3.11).

unsigned int num_data_points Number of data points.

unsigned char num_opt Number of octets for optional list of numbers defining number of points.

int * optional Optional list of numbers defining number of points.

unsigned char source_grid_def Source of grid definition (See Table 3.0).

struct g2c_section4_info

Information about Section 4 PRODUCT DEFINITION SECTION .

Definition at line 208 of file grib2_int.h .

Data Fields:

int field_num

unsigned short num_coord Number of coordinate values after template.

int * optional Optional list of numbers defining number of points.

unsigned short prod_def Product definition template number (See Table 4.0).

struct g2c_section5_info

Information about Section 5 DATA REPRESENTATION SECTION .

Definition at line 218 of file grib2_int.h .

Data Fields:

unsigned short data_def Data representation template number (See Table 5.0).

unsigned int num_data_points Number of data points where one or more values are specified in Section 7 when a bit map is present, total number of data points when a bit map is absent.

struct g2c_section6_info

Information about Section 6 BIT-MAP SECTION .

Definition at line 229 of file grib2_int.h .

Data Fields:

unsigned char indicator Bit map indicator.
See Table 6.0 .

struct g2c_section_info

Information about a section 3 through 7 in a GRIB2 message.

Definition at line 170 of file grib2_int.h .

Data Fields:

size_t bytes_to_sec Number of bytes from start of message to this section.

G2C_MESSAGE_INFO_T * msg Pointer to contianing message.

struct g2c_section_info * next Pointer to next in list.

struct g2c_section_info * prev Pointer to previous in list.

int sec_id ID of the section (0-based).

void * sec_info Pointer to struct specific for section 3, 4, 5, 6, or 7.

unsigned int sec_len Length of the section (in bytes).

unsigned char sec_num Section number.

long long int * template Grid, product, or data template.

int template_len Number of entries in template.

struct gtemplate

Struct for GRIB template, returned by getgridtemplate() .

Definition at line 277 of file grib2_int.h .

Data Fields:

g2int * ext Number of octets of each entry in the extension part of the template.

g2int extlen Number of entries in the template extension.

g2int * map Number of octets of each entry in the static part of the template.

g2int maplen Number of entries in the static part of the template.

g2int needext Indicates whether or not the template needs to be extended.

g2int num The template number.

g2int type The template type: 3 Grid Defintion Template.
4 Product Defintion Template. 5 Data Representation Template.

Macro Definition Documentation

#define ALOG2 (0.69314718)

ln(2.0)

Definition at line 30 of file grib2_int.h .

#define BYTE 8

Number of bits in a byte.

Definition at line 47 of file grib2_int.h .

#define EIGHT_BYTES 8

Eight bytes.

Definition at line 53 of file grib2_int.h .

#define EXTERN_MUTEX(m)

Pthreads not enabled, so do nothing.

Definition at line 113 of file grib2_int.h .

#define FOUR_BYTES 4

Four bytes.

Definition at line 52 of file grib2_int.h .

#define G2C_FILE_READ 0

Read.

Definition at line 131 of file grib2_int.h .

#define G2C_FILE_WRITE 1

Write.

Definition at line 132 of file grib2_int.h .

#define G2C_INDEX1_BDS_VAL_LEN 10

Length of the binary data section (bds) in index file.

Definition at line 73 of file grib2_int.h .

#define G2C_INDEX1_BMS_VAL_LEN 5

Length of the bitmap section (bms) in index file.

Definition at line 70 of file grib2_int.h .

#define G2C_INDEX1_GDS_VAL2_LEN 27

Length of the gds in index file.

Definition at line 82 of file grib2_int.h .

#define G2C_INDEX1_GDS_VAL_LEN 41

Length of the grid definition section (gds) in index file.

Definition at line 67 of file grib2_int.h .

#define G2C_INDEX1_PDS_VAL2_LEN 27

Length of the pds 2 section in the index file.

Definition at line 76 of file grib2_int.h .

#define G2C_INDEX1_PDS_VAL3_LEN 27

Length of the pds 3 section in the index file.

Definition at line 79 of file grib2_int.h .

#define G2C_INDEX1_PDS_VAL_LEN 27

Length of the product definition section (pds) in index file.

Definition at line 64 of file grib2_int.h .

#define G2C_JASPER_JPEG_FORMAT_NAME ’jpc’

Name of JPEG codec in Jasper.

Definition at line 33 of file grib2_int.h .

#define G2C_MAGIC_HEADER ’GRIB’

GRIB magic header string.

Definition at line 39 of file grib2_int.h .

#define G2C_MAGIC_HEADER_LEN 8

Full length of magic header string (includes GRIB version byte).

Definition at line 42 of file grib2_int.h .

#define G2C_MAX_MESSAGES 1024

Maximum number of messages in a file.

Definition at line 45 of file grib2_int.h .

#define G2C_MIN_MAX_BYTES 16

Minimum acceptable value for max_bytes parameter of g2c_get_msg() .

Definition at line 36 of file grib2_int.h .

#define hton64(y) (((uint64_t)htonl(y)) << WORD | htonl(y >> WORD))

Byte swap 64-bit ints. This converts native-endian 8-byte ints into big-endian 8-byte ints.

Definition at line 129 of file grib2_int.h .

#define LATITUDE ’Latitude’

Latitude.

Definition at line 56 of file grib2_int.h .

#define LOG(e)

Ignore logging to stdout. Library was not built with LOGGING=ON.

Definition at line 428 of file grib2_int.h .

#define LONGITUDE ’Longitude’

Longitude.

Definition at line 59 of file grib2_int.h .

#define MUTEX(m)

Pthreads not enabled, so do nothing.

Definition at line 110 of file grib2_int.h .

#define MUTEX_LOCK(m)

Pthreads not enabled, so do nothing.

Definition at line 116 of file grib2_int.h .

#define MUTEX_UNLOCK(m)

Pthreads not enabled, so do nothing.

Definition at line 119 of file grib2_int.h .

#define ntoh64(y) (((uint64_t)ntohl(y)) << WORD | ntohl(y >> WORD))

Byte swap 64-bit ints. This converts big-endian 8-byte ints into native endian 8-byte ints.

Definition at line 125 of file grib2_int.h .

#define ONE_BYTE 1

One byte.

Definition at line 50 of file grib2_int.h .

#define TWO_BYTES 2

Two bytes.

Definition at line 51 of file grib2_int.h .

#define WORD 32

Number of bits in four bytes.

Definition at line 48 of file grib2_int.h .

Typedef Documentation

typedef struct g2c_entry G2C_CODE_ENTRY_T

An entry in a GRIB2 code table.

typedef struct g2c_code_table G2C_CODE_TABLE_T

A GRIB2 code table.

typedef struct g2c_dim_info G2C_DIM_INFO_T

Keep information about dimensions defined in section 3.

typedef struct g2c_file_info G2C_FILE_INFO_T

This is the information about each open file.

typedef struct g2c_message_info G2C_MESSAGE_INFO_T

This is the information about each message.

typedef struct g2c_param G2C_PARAM_T

An entry in the table of NOAA abbreviations for GRIB parameters.

typedef struct g2c_section3_info G2C_SECTION3_INFO_T

Information about Section 3 GRID DEFINITION SECTION .

typedef struct g2c_section4_info G2C_SECTION4_INFO_T

Information about Section 4 PRODUCT DEFINITION SECTION .

typedef struct g2c_section5_info G2C_SECTION5_INFO_T

Information about Section 5 DATA REPRESENTATION SECTION .

typedef struct g2c_section6_info G2C_SECTION6_INFO_T

Information about Section 6 BIT-MAP SECTION .

typedef struct g2c_section_info G2C_SECTION_INFO_T

Information about a section 3 through 7 in a GRIB2 message.

typedef struct gtemplate gtemplate

Struct for GRIB template.

Definition at line 305 of file grib2_int.h .

Function Documentation

int add_msg (G2C_FILE_INFO_T * file, int msg_num, size_t bytes_to_msg,size_t bytes_in_msg, int read_file, G2C_MESSAGE_INFO_T ** msg)

Add new message to linked list.

Parameters

file Pointer to the G2C_FILE_INFO_T for this file.
msg_num Number of the message in file (0-based).
bytes_to_msg Number of bytes to the start of the message in the file.
bytes_in_msg Length of message in bytes.
read_file Set to true to cause metadata to be read from a GRIB2 data file.
msg Pointer to a pointer that will get the location of the newly created G2C_MESSAGE_INFO_T object. Ignored if NULL.

Returns

•

G2C_NOERROR - No error.

Author

Ed Hartnett

Date

Sep 12, 2022

Definition at line 1017 of file g2cfile.c .

References g2c_message_info::bytes_in_msg , g2c_message_info::bytes_to_msg , g2c_message_info::file , G2C_ENOMEM , G2C_NOERROR , LOG , g2c_file_info::msg , g2c_message_info::msg_num , g2c_message_info::next , g2c_file_info::num_messages , and read_msg_metadata() .

Referenced by g2c_open_index() , and read_metadata() .

int add_section (FILE * f, G2C_MESSAGE_INFO_T * msg, int sec_id, unsignedint sec_len, size_t bytes_to_sec, unsigned char sec_num)

Add metadata about a new section 3, 4, 5, 6, or 7.

Parameters

f FILE pointer to open GRIB2 file.
msg Pointer to the G2C_MESSAGE_INFO_T struct.
sec_id 0-based section ID.
sec_len Length of section.
bytes_to_sec Number of bytes from start of message to this section.
sec_num Section number.

Returns

•

G2C_NOERROR - No error.

Author

Ed Hartnett

Date

Sep 12, 2022

Definition at line 794 of file g2cfile.c .

References g2c_section_info::bytes_to_sec , G2C_EBADSECTION , G2C_ENOMEM , G2C_FILE_READ , G2C_NOERROR , g2c_rw_section3_metadata() , g2c_rw_section4_metadata() , g2c_rw_section5_metadata() , g2c_rw_section6_metadata() , LOG , g2c_section_info::msg , g2c_section_info::next , g2c_message_info::num_local , g2c_section_info::prev , g2c_message_info::sec , g2c_section_info::sec_id , g2c_section_info::sec_len , and g2c_section_info::sec_num .

Referenced by g2c_open_index() , and read_msg_metadata() .

void aecpack (float * fld, g2int width, g2int height, g2int * idrstmpl,unsigned char * cpack, g2int * lcpack)

This function packs up a float array into a AEC code stream. After the data are scaled, and the reference value is subtracted out, the data are passed to the AEC encoder.

This function also fills in GRIB2 Data Representation Template 5.42 with the appropriate values.

Parameters

fld Pointer to the float data values to pack.
width The number of points in the x direction.
height The number of points in the y direction.
idrstmpl Contains the array of values for Data Representation Template Table 5.42 .

	•		0 Reference value - ignored on input, set by aecpack routine.
	•		1 Binary Scale Factor - used on input, unchanged by aecpack routine.
	•		2 Decimal Scale Factor - used on input, unchanged by aecpack routine.
	•		3 number of bits for each data value - ignored on input
	•		4 Original field type - currently ignored on input Data values assumed to be reals. Set to 0 on output.
	•		5 CCSDS compression options mask.
	•		6 Block size.
	•		7 Reference sample interval. May be modified in this function.

cpack A pointer that will get the packed data field. Must be allocated before this function is called. Pass the allocated size in the lcpack parameter.
lcpack Pointer that gets the length of packed field in cpack. This must be set by the calling function to the size available in cpack.

Author

Eric Engle (adapted from jpcpack)

Definition at line 297 of file aecpack.c .

References aecpack_int() .

Referenced by g2_addfield() .

g2int aecunpack (unsigned char * cpack, g2int len, g2int * idrstmpl, g2intndpts, float * fld)

Unpack AEC compressed data into an array of floats, using info from the GRIB2 Data Representation Template 5.42 .

Parameters

cpack The packed data.
len The length of the packed data.
idrstmpl Pointer to array of values for Data Representation Template 5.42 .
ndpts The number of data values to unpack.
fld A pointer that gets the unpacked data values as an array of float.

Returns

•

G2C_NOERROR No error.

Author

Eric Engle

Date

2023-10-16

Definition at line 161 of file aecunpack.c .

References aecunpack_int() , and LOG .

Referenced by g2c_unpack7_int() .

void cmplxpack (float * fld, g2int ndpts, g2int idrsnum, g2int * idrstmpl,unsigned char * cpack, g2int * lcpack)

Pack up a data field using a complex packing algorithm. This function supports GRIB2 complex packing templates with or without spatial differences (i.e. DRTs 5.2 and 5.3). It also fills in GRIB2 Data Representation Template 5.2 or 5.3 with the appropriate values.

Parameters

fld Contains the data values to pack.
ndpts The number of data values in array fld
idrsnum Data Representation Template number. Must equal 2 or 3.
idrstmpl Contains the array of values for Data Representation Template 5.2 or 5.3

	•		0 Reference value - ignored on input, set by compack routine.
	•		1 Binary Scale Factor
	•		2 Decimal Scale Factor
	•		6 Missing value management
	•		7 Primary missing value
	•		8 Secondary missing value
	•		16 Order of Spatial Differencing ( 1 or 2 )

cpack The packed data field.
lcpack length of packed field cpack. Will be set to -1 if missing value management field is not 1 or 2.

Author

Stephen Gilbert

Date

2004-08-27

Definition at line 37 of file cmplxpack.c .

References compack() , and misspack() .

Referenced by g2_addfield() .

void compack (float * fld, g2int ndpts, g2int idrsnum, g2int * idrstmpl,unsigned char * cpack, g2int * lcpack)

Pack a data field using a complex packing algorithm. This function supports GRIB2 complex packing templates with or without spatial differences (i.e. DRTs 5.2 and 5.3). It also fills in GRIB2 Data Representation Template 5.2 or Template 5.3 with the appropriate values.

Parameters

fld Contains the data values to pack.
ndpts The number of data values in array fld.
idrsnum Data Representation Template number. Must equal 2 or 3.
idrstmpl Contains the array of values for Data Representation Template 5.2 or 5.3.

	•		0 Reference value - ignored on input, set my compack() .
	•		1 Binary Scale Factor
	•		2 Decimal Scale Factor
	•		6 Missing value management
	•		7 Primary missing value
	•		8 Secondary missing value
	•		16 Order of Spatial Differencing (1 or 2)

cpack The packed data field.
lcpack length of packed field cpack.

Author

Stephen Gilbert

Date

2002-11-07

Definition at line 42 of file compack.c .

References ALOG2 , int_power() , mkieee() , pack_gp() , sbit() , and sbits() .

Referenced by cmplxpack() .

int comunpack (unsigned char * cpack, g2int lensec, g2int idrsnum, g2int idrstmpl, g2int ndpts, float fld)

Unpack a data field that was packed using a complex packing algorithm, using info from the GRIB2 Data Representation Template 5.2 or Template 5.3 . Supports GRIB2 complex packing templates with or without spatial differences (i.e. DRTs 5.2 and 5.3).

Program History Log

Date Programmer Comments 2002-10-29 Gilbert Initial 2004-12-16 Gilbert Added test (from Arthur Taylor/MDL) verifying group widths/lengths

Parameters

cpack pointer to the packed data field.
lensec length of section 7 (used for error checking).
idrsnum Data Representation Template number. Must equal 2 or 3.
idrstmpl pointer to the array of values for Data Representation Template 5.2 or 5.3
ndpts The number of data values to unpack
fld Contains the unpacked data values. Must be allocated with at least ndpts * sizeof(float) bytes before calling this routine.

Returns

0 for success, error code otherwise.

Author

Stephen Gilbert

Date

2002-10-29

Definition at line 41 of file comunpack.c .

References gbit() , gbits() , int_power() , LOG , and rdieee() .

Referenced by g2c_unpack7_int() .

int dec_aec (unsigned char * cpack, g2int len, g2int nbits, g2int flags,g2int block_size, g2int rsi, unsigned char * cfld, g2int cfldlen)

Decode an AEC code stream specified in the CCSDS 121.0-B-3 Blue Book .

Parameters

cpack Pointer to buffer that holds the input AEC code stream.
len Length (in bytes) of the buffer that holds the input AEC code stream.
nbits CCSDS bits per sample.
flags CCSDS compression options mask.
block_size CCSDS block size.
rsi CCSDS reference sample interval.
cfld Pointer to output buffer from the AEC decoder.
cfldlen length of output buffer.

Returns

	•		>0 Length of data from AEC decoder
	•		0 Successful decode (AEC_OK)
	•		-1 AEC_CONF_ERROR
	•		-2 AEC_STREAM_ERROR
	•		-3 AEC_DATA_ERROR
	•		-4 AEC_MEM_ERROR
	•		-5 AEC_RSI_OFFSETS_ERROR

Author

Eric Engle

Date

2023-10-16

Definition at line 38 of file decenc_aec.c .

References LOG .

Referenced by aecunpack_int() .

int dec_jpeg2000 (char * injpc, g2int bufsize, g2int * outfld)

Decode a JPEG2000 code stream specified in the JPEG2000 Part-1 standard (i.e., ISO/IEC 15444-1) using JasPer Software .

Parameters

injpc Pointer to buffer that holds the input JPEG2000 code stream.
bufsize Length (in bytes) of the buffer that holds the input JPEG2000 code stream.
outfld Pointer to g2int array, already allocated, that gets the unpacked data.

Returns

	•		0 Successful decode
	•		G2_JASPER_DECODE Error decode jpeg2000 code stream.
	•		G2_JASPER_DECODE_COLOR decoded image had multiple color components. Only grayscale is expected.
	•		G2_JASPER_INIT Error inializing Jasper library.

Author

Stephen Gilbert, Ed Hartnett

Definition at line 377 of file decenc_jpeg2000.c .

References int_dec_jpeg2000() .

Referenced by jpcunpack_int() .

int dec_png (unsigned char * pngbuf, g2int * width, g2int * height,unsigned char * cout)

Decode PNG.

Parameters

pngbuf Pointer to PNG buffer.
width Pointer to width.
height Pointer to height.
cout Output buffer.

Returns

0 for success, error code otherwise.

Author

Stephen Gilbert

Definition at line 127 of file decenc_png.c .

References G2C_PNG_HEIGHT_MAX , G2C_PNG_WIDTH_MAX , and user_read_data() .

Referenced by g2c_dec_png() , and pngunpack_int() .

int enc_aec (unsigned char * data, g2int ctemplen, g2int nbits, g2intflags, g2int block_size, g2int rsi, unsigned char * aecbuf, g2int *aecbuflen)

Encode data into an AEC code stream specified in the CCSDS 121.0-B-3 Blue Book .

Parameters

data Pointer to buffer that holds the input data.
ctemplen Length (in bytes) of the buffer that holds the input data..
nbits CCSDS bits per sample.
flags CCSDS compression options mask.
block_size CCSDS block size.
rsi CCSDS reference sample interval.
aecbuf Pointer to buffer holding the AEC encoded stream.
aecbuflen Length of AEC code stream.

Returns

	•		>0 Exact length of AEC encoded data.
	•		0 Successful decode (AEC_OK)
	•		-1 AEC_CONF_ERROR
	•		-2 AEC_STREAM_ERROR
	•		-3 AEC_DATA_ERROR
	•		-4 AEC_MEM_ERROR
	•		-5 AEC_RSI_OFFSETS_ERROR

Author

Eric Engle

Date

2023-10-16

Definition at line 108 of file decenc_aec.c .

References LOG .

Referenced by aecpack_int() .

int enc_jpeg2000 (unsigned char * cin, g2int width, g2int height, g2intnbits, g2int ltype, g2int ratio, g2int retry, char * outjpc, g2intjpclen)

Encode a grayscale image into a JPEG2000 code stream specified in the JPEG2000 Part-1 standard (i.e., ISO/IEC 15444-1) using JasPer Software .

•

### Program History Log Date Programmer Comments 2002-12-02 Gilbert Initial 2004-12-16 Gilbert Added retry argument allowing increased guard bits. 2022-04-15 Hartnett Converted to use jas_ instead of jpc_ functions.

Parameters

cin Packed matrix of Grayscale image values to encode.
width width of image.
height height of image.
nbits depth (in bits) of image. i.e number of bits used to hold each data value.
ltype indicator of lossless or lossy compression.

	•		1, for lossy compression
	•		!= 1, for lossless compression

ratio target compression ratio. (ratio:1) Used only when ltype == 1.
retry If 1 try increasing number of guard bits.
outjpc Output encoded JPEG2000 code stream.
jpclen Number of bytes allocated for the output JPEG2000 code stream in outjpc.

Returns

	•		> 0 = Length in bytes of encoded JPEG2000 code stream
	•		G2_JASPER_INIT Error initializing jasper library.
	•		G2_JASPER_ENCODE Error encode jpeg2000 code stream.

Note

Requires JasPer Software version 1.500.4 or 1.700.2 or later.

Author

Stephen Gilbert

Date

2002-12-02

Author

Ed Hartnett

Definition at line 94 of file decenc_jpeg2000.c .

References G2_JASPER_ENCODE , G2_JASPER_INIT , G2C_JASPER_JPEG_FORMAT_NAME , LOG , and MAXOPTSSIZE .

Referenced by g2c_enc_jpeg2000() , and jpcpack_int() .

int enc_png (unsigned char * data, g2int width, g2int height, g2int nbits,unsigned char * pngbuf)

Encode PNG.

Parameters

data data.
width width.
height height.
nbits number of bits.
pngbuf PNG buffer.

Returns

PNG length, or negative number for error.

Author

Stephen Gilbert

Definition at line 259 of file decenc_png.c .

References user_flush_data() , and user_write_data() .

Referenced by g2c_enc_png() , and pngpack_int() .

gtemplate * extdrstemplate (g2int number, g2int * list)

This subroutine generates the remaining octet map for a given Data Representation Template, if required. Some Templates can vary depending on data values given in an earlier part of the Template, and it is necessary to know some of the earlier entry values to generate the full octet map of the Template.

Parameters

number The number of the Data Representation Template that is being requested.
list The list of values for each entry in the the Data Representation Template.

Returns

Pointer to the returned template struct. Returns NULL pointer, if template not found.

Author

Stephen Gilbert

Date

2000-05-11

Definition at line 218 of file drstemplates.c .

References getdrsindex() , and getdrstemplate() .

Referenced by g2_unpack5() .

gtemplate * extgridtemplate (g2int number, g2int * template)

This subroutine generates the remaining octet map for a given Grid Definition Template, if required. Some Templates can vary depending on data values given in an earlier part of the Template, and it is necessary to know some of the earlier entry values to generate the full octet map of the Template.

This function allocates memory for the extension. The pointer ext in the gtemplate struct must be freed to prevent memory leaks.

Parameters

number The number of the Grid Definition Template that is being requested.
template The grid definition template array.

Returns

Pointer to the returned template struct. Returns NULL pointer, if template not found.

Author

Stephen Gilbert

Date

2000-05-09

Definition at line 241 of file gridtemplates.c .

References getgridindex() , and getgridtemplate() .

Referenced by g2_addgrid() , g2_unpack3() , and g2c_get_grid_template_extension() .

gtemplate * extpdstemplate (g2int number, g2int * list)

This subroutine generates the remaining octet map for a given Product Definition Template, if required. Some Templates can vary depending on data values given in an earlier part of the Template, and it is necessary to know some of the earlier entry values to generate the full octet map of the Template.

This function allocates memory in the ext field of the gtemplate struct. This memory must be freed by the caller.

Parameters

number number of the Product Definition Template 4.NN that is being requested.
list The list of values for each entry in the the Product Definition Template.

Returns

Pointer to the returned template struct. Returns NULL pointer if template not found.

Author

Stephen Gilbert

Date

2000-05-11

Definition at line 553 of file pdstemplates.c .

References getpdsindex() , and getpdstemplate() .

Referenced by g2_addfield() , g2_unpack4() , and g2c_get_pds_template_extension() .

int g2c_add_file (const char * path, int mode, int * g2cid)

Open a GRIB2 file and add it to the list of open files.

Parameters

path Path of the file.
mode Open mode flags.
g2cid Pointer that gets an indentifier for the file.

Returns

	•		G2C_NOERROR - No error.
	•		G2C_EINVAL - Invalid input.
	•		G2C_ETOOMANYFILES - Trying to open too many files at the same time.

Author

Ed Hartnett

Date

Aug 16, 2022

Definition at line 1143 of file g2cfile.c .

References find_available_g2cid() , G2C_EFILE , G2C_EINVAL , G2C_ENAMETOOLONG , g2c_file , G2C_MAX_NAME , G2C_NOERROR , G2C_WRITE , g2c_file_info::g2cid , LOG , g2c_file_info::msg , and g2c_file_info::num_messages .

Referenced by g2c_open() , and g2c_open_index() .

int g2c_check_msg (unsigned char * cgrib, g2int * lencurr, int verbose)

Check for ’GRIB’ at the beginning of a GRIB message, and check to see if the message is already terminated with ’7777’.

Parameters

cgrib Buffer that contains the GRIB message.
lencurr Pointer that gets the length of the GRIB message.
verbose If non-zero, print any error messages to stdout.

Returns

	•		G2C_NOERROR No error.
	•		G2C_ENOTGRIB GRIB header not found.
	•		G2C_EMSGCOMPLETE GRIB message already complete.

Author

Ed Hartnett

Date

Nov 11, 2021

Definition at line 26 of file util.c .

References G2C_EMSGCOMPLETE , G2C_ENOTGRIB , G2C_NOERROR , and gbit() .

Referenced by g2_addfield() , g2_addgrid() , g2_addlocal() , and g2_gribend() .

int g2c_file_io (FILE * f, int write, int g2ctype, void * var)

Read or write a big-endian integer type to an open file, with conversion between native and big-endian format. GRIB2 handles negative numbers in a special way. Instead of storing two-compliments, like every other programmer and computing organization in the world, GRIB2 flips the first bit, then stores the rest of the int as an unsigned number in the remaining 31 bits. How exciting!

This function takes the excitement out of GRIB2 negative numbers.

Parameters

f Pointer to the open FILE.
write Non-zero if function should write, otherwise function will read.
g2ctype The type to be read or written.
var Pointer to the int to be written, or pointer to the storage that gets the int read.

Returns

	•		:: G2C_NOERROR No error.
	•		:: G2C_EINVAL Invalid input.
	•		:: G2C_EFILE Error reading/writing file.

Author

Ed Hartnett

Date

11/7/22

Definition at line 41 of file g2cio.c .

References BITSHIFT_15 , BITSHIFT_31 , BITSHIFT_63 , BITSHIFT_7 , EIGHT_BYTES , FOUR_BYTES , G2C_BYTE , G2C_EBADTYPE , G2C_EFILE , G2C_EINVAL , G2C_INT , G2C_INT64 , G2C_NOERROR , G2C_SHORT , G2C_UBYTE , G2C_UINT , G2C_UINT64 , G2C_USHORT , hton64 , ntoh64 , ONE_BYTE , and TWO_BYTES .

Referenced by g2c_file_io_byte() , g2c_file_io_int() , g2c_file_io_longlong() , g2c_file_io_short() , g2c_file_io_ubyte() , g2c_file_io_uint() , g2c_file_io_ulonglong() , and g2c_file_io_ushort() .

int g2c_file_io_byte (FILE * f, int write, char * var)

Read or write a big-endian signed byte to an open GRIB2 file, with conversion between native and big-endian format, and special GRIB2 handling of negative numbers.

Parameters

f Pointer to the open GRIB2 FILE.
write Non-zero to write, zero to read.
var Pointer to the byte.

Returns

	•		:: G2C_NOERROR No error.
	•		:: G2C_EINVAL Invalid input.
	•		:: G2C_EFILE Error reading/writing file.

Author

Ed Hartnett 11/13/22

Definition at line 316 of file g2cio.c .

References G2C_BYTE , and g2c_file_io() .

Referenced by g2c_file_io_template() .

int g2c_file_io_int (FILE * f, int write, int * var)

Read or write a big-endian 4-byte signed int to an open GRIB2 file, with conversion between native and big-endian format, and special GRIB2 handling of negative numbers.

Parameters

f Pointer to the open GRIB2 FILE.
write Non-zero to write, zero to read.
var Pointer to the int.

Returns

	•		:: G2C_NOERROR No error.
	•		:: G2C_EINVAL Invalid input.
	•		:: G2C_EFILE Error reading/writing file.

Author

Ed Hartnett 11/7/22

Definition at line 230 of file g2cio.c .

References g2c_file_io() , and G2C_INT .

Referenced by g2c_file_io_template() .

int g2c_file_io_longlong (FILE * f, int write, long long * var)

Read or write a big-endian signed long long to an open GRIB2 file, with conversion between native and big-endian format, and special GRIB2 handling of negative numbers.

Parameters

f Pointer to the open GRIB2 FILE.
write Non-zero to write, zero to read.
var Pointer to the long long.

Returns

	•		:: G2C_NOERROR No error.
	•		:: G2C_EINVAL Invalid input.
	•		:: G2C_EFILE Error reading/writing file.

Author

Ed Hartnett 11/13/22

Definition at line 359 of file g2cio.c .

References g2c_file_io() , and G2C_INT64 .

int g2c_file_io_short (FILE * f, int write, short * var)

Read or write a big-endian signed short to an open GRIB2 file, with conversion between native and big-endian format, and special GRIB2 handling of negative numbers.

Parameters

f Pointer to the open GRIB2 FILE.
write Non-zero to write, zero to read.
var Pointer to the short.

Returns

	•		:: G2C_NOERROR No error.
	•		:: G2C_EINVAL Invalid input.
	•		:: G2C_EFILE Error reading/writing file.

Author

Ed Hartnett 11/13/22

Definition at line 273 of file g2cio.c .

References g2c_file_io() , and G2C_SHORT .

Referenced by g2c_file_io_template() , g2c_rw_section1_metadata() , g2c_start_index_record() , and g2c_start_index_record_lf() .

int g2c_file_io_template (FILE * f, int rw_flag, int map, long long int *template_value)

Read or write a big-endian 4-byte int or unsigned int from or to an open file, with conversion between native and big-endian format, and handling of GRIB negative numbers. This is for template values.

With template values, if the map value is negative, then the template value may be negative.

Parameters

f Pointer to the open FILE.
rw_flag Non-zero if function should write, otherwise function will read.
map The map value for this template item.
template_value Pointer to the template value to be written, or pointer to the storage that gets the templage value read.

Returns

	•		:: G2C_NOERROR No error.
	•		:: G2C_EINVAL Invalid input.
	•		:: G2C_EFILE Error reading/writing file.

Author

Ed Hartnett 11/7/22

Definition at line 408 of file g2cio.c .

References FOUR_BYTES , G2C_EBADTEMPLATE , g2c_file_io_byte() , g2c_file_io_int() , g2c_file_io_short() , g2c_file_io_ubyte() , g2c_file_io_uint() , g2c_file_io_ushort() , G2C_NOERROR , ONE_BYTE , and TWO_BYTES .

Referenced by g2c_rw_section3_metadata() , g2c_rw_section4_metadata() , and g2c_rw_section5_metadata() .

int g2c_file_io_ubyte (FILE * f, int write, unsigned char * var)

Read or write a big-endian unsigned byte to an open GRIB2 file, with conversion between native and big-endian format.

Parameters

f Pointer to the open GRIB2 FILE.
write Non-zero to write, zero to read.
var Pointer to the unsigned byte.

Returns

	•		:: G2C_NOERROR No error.
	•		:: G2C_EINVAL Invalid input.
	•		:: G2C_EFILE Error reading/writing file.

Author

Ed Hartnett 11/13/22

Definition at line 337 of file g2cio.c .

References g2c_file_io() , and G2C_UBYTE .

Referenced by g2c_file_io_template() , g2c_open_index() , g2c_rw_section1_metadata() , g2c_rw_section3_metadata() , g2c_rw_section6_metadata() , g2c_start_index1_record() , g2c_start_index_record() , g2c_start_index_record_lf() , g2c_write_index() , and read_msg_metadata() .

int g2c_file_io_uint (FILE * f, int write, unsigned int * var)

Read or write a big-endian 4-byte unsigned int to an open GRIB2 file, with conversion between native and big-endian format.

Parameters

f Pointer to the open GRIB2 FILE.
write Non-zero to write, zero to read.
var Pointer to the unsigned int.

Returns

	•		:: G2C_NOERROR No error.
	•		:: G2C_EINVAL Invalid input.
	•		:: G2C_EFILE Error reading/writing file.

Author

Ed Hartnett 11/7/22

Definition at line 251 of file g2cio.c .

References g2c_file_io() , and G2C_UINT .

Referenced by g2c_file_io_template() , g2c_open_index() , g2c_rw_section1_metadata() , g2c_rw_section3_metadata() , g2c_rw_section5_metadata() , g2c_start_index1_record() , g2c_start_index_record() , g2c_start_index_record_lf() , g2c_write_index() , and read_msg_metadata() .

int g2c_file_io_ulonglong (FILE * f, int write, unsigned long long * var)

Read or write a big-endian unsigned long long to an open GRIB2 file, with conversion between native and big-endian format.

Parameters

f Pointer to the open GRIB2 FILE.
write Non-zero to write, zero to read.
var Pointer to the unsigned long long.

Returns

	•		:: G2C_NOERROR No error.
	•		:: G2C_EINVAL Invalid input.
	•		:: G2C_EFILE Error reading/writing file.

Author

Ed Hartnett 11/13/22

Definition at line 380 of file g2cio.c .

References g2c_file_io() , and G2C_UINT64 .

Referenced by g2c_start_index_record() , and g2c_start_index_record_lf() .

int g2c_file_io_ushort (FILE * f, int write, unsigned short * var)

Read or write a big-endian unsigned short to an open GRIB2 file, with conversion between native and big-endian format.

Parameters

f Pointer to the open GRIB2 FILE.
write Non-zero to write, zero to read.
var Pointer to the unsigned short.

Returns

	•		:: G2C_NOERROR No error.
	•		:: G2C_EINVAL Invalid input.
	•		:: G2C_EFILE Error reading/writing file.

Author

Ed Hartnett 11/13/22

Definition at line 294 of file g2cio.c .

References g2c_file_io() , and G2C_USHORT .

Referenced by g2c_file_io_template() , g2c_rw_section3_metadata() , g2c_rw_section4_metadata() , and g2c_rw_section5_metadata() .

int g2c_get_datetime (int ipdtn, long long int * ipdtmpl, short year,unsigned char month, unsigned char day, unsigned char hour, unsignedchar minute, unsigned char second, char * tabbrev)

Convert date and time from GRIB2 info to string output.

Note

This function is based on the prvtime() function in NCEPLIBS-grib_utils.

Parameters

ipdtn Product Definition Template Number ([Code Table 4.0] (https://www.nco.ncep.noaa.gov/pmb/docs/grib2/grib2_doc/grib2_table4-0.shtml)).
ipdtmpl Array of data values for the Product Definition Template specified by ipdtn.
year year
month month
day day
hour hour
minute minute
second second
tabbrev Character array that will get the date and time string. Must be of length 100.

Returns

•

G2C_NOERROR No error.

Author

Ed Hartnett

Date

Sep 28, 2022

Definition at line 49 of file g2cdegrib2.c .

References G2C_DATE_TIME_LEN , and G2C_NOERROR .

Referenced by g2c_degrib2() .

int g2c_get_level_desc (int ipdtn, long long int * ipdtmpl, char *level_desc)

Determine the string that describes the level information, given the GRIB2 Product Definition Template information. This subroutine finds the ’Type of first fixed surface’ (see [Code table 4.5](https://www.nco.ncep.noaa.gov/pmb/docs/grib2/grib2_doc/grib2_temp4-0.shtml)) using the product definition template value and product template array. The location in the template array varies depending on the template number.

Parameters

ipdtn Product Definition Template Number ([Code Table 4.0] (https://www.nco.ncep.noaa.gov/pmb/docs/grib2/grib2_doc/grib2_table4-0.shtml)).
ipdtmpl Array of data values for the Product Definition Template specified by ipdtn.
level_desc Character array which gets the string describing the level. Must be of length 40.

Returns

•

G2C_NOERROR No error.

Author

Ed Hartnett

Date

Sep 28, 2022

Definition at line 309 of file g2cdegrib2.c .

References format_level() , and G2C_NOERROR .

Referenced by g2c_degrib2() .

int g2c_log_section1 (G2C_MESSAGE_INFO_T * msg)

Log section 0 information.

Parameters

msg Pointer to G2C_MESSAGE_INFO_T which contains section 0 information.

Returns

•

G2C_NOERROR No error.

Author

Ed Hartnett

Date

10/16/22

Definition at line 101 of file g2cutil.c .

References g2c_message_info::center , g2c_message_info::day , g2c_message_info::discipline , g2c_csv_init() , g2c_find_desc() , G2C_MAX_GRIB_DESC_LEN , G2C_NOERROR , g2c_message_info::hour , g2c_message_info::local_version , LOG , g2c_message_info::master_version , g2c_message_info::minute , g2c_message_info::month , g2c_message_info::second , g2c_message_info::sig_ref_time , g2c_message_info::status , g2c_message_info::subcenter , g2c_message_info::type , and g2c_message_info::year .

Referenced by g2c_log_file() , and g2c_open_index() .

int g2c_rw_section1_metadata (FILE * f, int rw_flag, G2C_MESSAGE_INFO_T *msg)

Read Section 1.

Parameters

f Pointer to open file.
rw_flag G2C_FILE_WRITE if function should write, G2C_FILE_READ if it should read.
msg Pointer to G2C_MESSAGE_INFO_T which will be populated with the values of section 0.

Returns

-G2C_NOERROR No error.

Author

Ed Hartnett

Date

10/16/22

Definition at line 874 of file g2cfile.c .

References g2c_message_info::center , g2c_message_info::day , G2C_ENOSECTION , g2c_file_io_short() , g2c_file_io_ubyte() , g2c_file_io_uint() , G2C_NOERROR , G2C_SECTION1_BYTES , g2c_message_info::hour , g2c_message_info::local_version , LOG , g2c_message_info::master_version , g2c_message_info::minute , g2c_message_info::month , g2c_message_info::sec1_len , g2c_message_info::second , g2c_message_info::sig_ref_time , g2c_message_info::status , g2c_message_info::subcenter , g2c_message_info::type , and g2c_message_info::year .

Referenced by g2c_open_index() , g2c_write_index() , and read_msg_metadata() .

int g2c_rw_section3_metadata (FILE * f, int rw_flag, G2C_SECTION_INFO_T *sec)

Read the metadata from section 3 (Grid Definition Section) of a GRIB2 message. When this function is called, the file cursor is positioned just after the section number field in the section. The size of the section, and the section number, have already been read when this function is called.

Parameters

f FILE pointer to open GRIB2 file.
rw_flag G2C_FILE_WRITE if function should write, G2C_FILE_READ (0) if it should read.
sec Pointer to the G2C_SECTION_INFO_T struct.

Returns

	•		G2C_NOERROR No error.
	•		G2C_EINVAL Invalid input.
	•		G2C_ENOMEM Out of memory.
	•		G2C_ENOTEMPLATE Can’t find template.

Author

Ed Hartnett

Date

Sep 15, 2022

Definition at line 478 of file g2cfile.c .

References determine_dims() , G2C_EINVAL , G2C_ENOMEM , g2c_file_io_template() , g2c_file_io_ubyte() , g2c_file_io_uint() , g2c_file_io_ushort() , g2c_get_grid_template() , G2C_MAX_GDS_TEMPLATE_MAPLEN , G2C_NOERROR , g2c_section3_info::grid_def , g2c_section3_info::interp_list , LOG , g2c_section3_info::num_data_points , g2c_section3_info::num_opt , g2c_section_info::sec_info , g2c_section_info::sec_num , g2c_section3_info::source_grid_def , g2c_section_info::template , and g2c_section_info::template_len .

Referenced by add_section() , and g2c_write_index() .

int g2c_rw_section4_metadata (FILE * f, int rw_flag, G2C_SECTION_INFO_T *sec)

Read or write the metadata from section 4 (Product Definition Section) of a GRIB2 message. When this function is called, the file cursor is positioned just after the section number field in the section. The size of the section, and the section number, have already been read/written when this function is called.

Parameters

f FILE pointer to open GRIB2 file.
rw_flag G2C_FILE_WRITE if function should write, G2C_FILE_READ if it should read.
sec Pointer to the G2C_SECTION_INFO_T struct.

Returns

	•		G2C_NOERROR No error.
	•		G2C_EINVAL Invalid input.
	•		G2C_ENOMEM Out of memory.
	•		G2C_ENOTEMPLATE Can’t find template.

Author

Ed Hartnett

Date

Sep 16, 2022

Definition at line 574 of file g2cfile.c .

References G2C_EINVAL , G2C_ENOMEM , g2c_file_io_template() , g2c_file_io_ushort() , g2c_get_pds_template() , G2C_MAX_PDS_TEMPLATE_MAPLEN , G2C_NOERROR , LOG , g2c_section_info::msg , g2c_section4_info::num_coord , g2c_message_info::num_fields , g2c_section4_info::prod_def , g2c_section_info::sec_info , g2c_section_info::sec_num , g2c_section_info::template , and g2c_section_info::template_len .

Referenced by add_section() , and g2c_write_index() .

int g2c_rw_section5_metadata (FILE * f, int rw_flag, G2C_SECTION_INFO_T *sec)

Read or write the metadata from section 5 (Data Representation Section) of a GRIB2 message. When this function is called, the file cursor is positioned just after the section number field in the section. The size of the section, and the section number, have already been read when this function is called.

Parameters

f FILE pointer to open GRIB2 file.
rw_flag G2C_FILE_WRITE if function should write, G2C_FILE_READ if it should read.
sec Pointer to the G2C_SECTION_INFO_T struct.

Returns

	•		G2C_NOERROR No error.
	•		G2C_EINVAL Invalid input.
	•		G2C_ENOMEM Out of memory.
	•		G2C_ENOTEMPLATE Can’t find template.

Author

Ed Hartnett

Date

Sep 16, 2022

Definition at line 663 of file g2cfile.c .

References g2c_section5_info::data_def , G2C_EINVAL , G2C_ENOMEM , g2c_file_io_template() , g2c_file_io_uint() , g2c_file_io_ushort() , g2c_get_drs_template() , G2C_MAX_PDS_TEMPLATE_MAPLEN , G2C_NOERROR , LOG , g2c_section5_info::num_data_points , g2c_section_info::sec_info , g2c_section_info::template , and g2c_section_info::template_len .

Referenced by add_section() , and g2c_write_index() .

int g2c_rw_section6_metadata (FILE * f, int rw_flag, G2C_SECTION_INFO_T *sec)

Read or write the metadata from section 6 (Data Representation Section) of a GRIB2 message. When this function is called, the file cursor is positioned just after the section number field in the section. The size of the section, and the section number, have already been read when this function is called.

Parameters

f FILE pointer to open GRIB2 file.
rw_flag G2C_FILE_WRITE if function should write, G2C_FILE_READ if it should read.
sec Pointer to the G2C_SECTION_INFO_T struct.

Returns

	•		G2C_NOERROR No error.
	•		G2C_EINVAL Invalid input.
	•		G2C_ENOMEM Out of memory.
	•		G2C_ENOTEMPLATE Can’t find template.

Author

Ed Hartnett

Date

Sep 16, 2022

Definition at line 745 of file g2cfile.c .

References G2C_EINVAL , G2C_ENOMEM , g2c_file_io_ubyte() , G2C_NOERROR , g2c_section6_info::indicator , LOG , and g2c_section_info::sec_info .

Referenced by add_section() .

void gbit (unsigned char * in, g2int * iout, g2int iskip, g2int nbits)

Get arbitrary size values from a packed bit string, right justifying each value in the unpacked iout array.

Parameters

in pointer to character array input.
iout pointer that gets the unpacked array output.
iskip initial number of bits to skip.
nbits number of bits to take.

Author

NOAA Programmer

Definition at line 20 of file gbits.c .

References gbits() .

Referenced by comunpack() , g2_addfield() , g2_addgrid() , g2_addlocal() , g2_getfld() , g2_gribend() , g2_info() , g2_unpack1() , g2_unpack2() , g2_unpack3() , g2_unpack4() , g2_unpack5() , g2_unpack6() , g2c_check_msg() , g2c_unpack7_int() , and seekgb() .

void gbits (unsigned char * in, g2int * iout, g2int iskip, g2int nbits,g2int nskip, g2int n)

Unpack arbitrary size values from a packed bit string, right justifying each value in the unpacked iout array.

Parameters

in Pointer to character array input.
iout Pointer that gets the unpacked array output.
iskip Initial number of bits to skip.
nbits Number of bits to take.
nskip Additional number of bits to skip on each iteration.
n Number of iterations.

Author

NOAA Programmer

Definition at line 57 of file gbits.c .

Referenced by aecunpack_int() , comunpack() , g2_unpack3() , g2_unpack4() , g2_unpack6() , g2c_gbits_int() , gbit() , pngunpack_int() , simunpack() , and specunpack() .

g2int getdim (unsigned char * csec3, g2int * width, g2int * height, g2int *iscan)

Return the dimensions and scanning mode of a grid definition.

Parameters

csec3 Character array that contains the packed GRIB2 GDS.
width x (or i) dimension of the grid. 0 if grid is not recognized.
height y (or j) dimension of the grid. 0 if grid is not recognized.
iscan Scanning mode (see Table 3.4 ). 0 of grid not recognized.

Returns

Always returns 0.

Author

Stephen Gilbert

Date

2002-12-11

Definition at line 27 of file getdim.c .

References g2_unpack3() .

Referenced by g2_addfield() .

gtemplate * getdrstemplate (g2int number)

This subroutine returns DRS template information for a specified Data Representation Template. The number of entries in the template is returned along with a map of the number of octets occupied by each entry. Also, a flag is returned to indicate whether the template would need to be extended.

Parameters

number The number of the Data Representation Template that is being requested.

Returns

Pointer to the returned template struct. Returns NULL if template not found.

Author

Stephen Gilbert

Date

2000-05-11

Definition at line 172 of file drstemplates.c .

References getdrsindex() , and templatesdrs .

Referenced by extdrstemplate() , g2_addfield() , and g2_unpack5() .

gtemplate * getgridtemplate (g2int number)

This subroutine returns grid template information for a specified Grid Definition Template for [Section 3 - the Grid Definition Section (GDS)](https://www.nco.ncep.noaa.gov/pmb/docs/grib2/grib2_doc/grib2_sect3.shtml). The number of entries in the template is returned along with a map of the number of octets occupied by each entry. Also, a flag is returned to indicate whether the template would need to be extended.

This function allocates storage for the template. The returned pointer must be freed by the caller.

Parameters

number The number of the Grid Definition Template that is being requested.

Returns

Pointer to the returned template struct (must be freed by caller). Returns NULL pointer, if template not found.

Author

Stephen Gilbert

Date

2000-05-09

Definition at line 193 of file gridtemplates.c .

References getgridindex() , and templatesgrid .

Referenced by extgridtemplate() , g2_addgrid() , and g2_unpack3() .

gtemplate * getpdstemplate (g2int number)

This subroutine returns PDS template information for a specified Product Definition Template. The number of entries in the template is returned along with a map of the number of octets occupied by each entry. Also, a flag is returned to indicate whether the template would need to be extended.

This function allocates memory for the gtemplate struct, which must be freed by the caller.

Parameters

number the number of the Product Definition Template that is being requested.

Returns

Pointer to the returned template struct. Returns NULL pointer if template not found.

Author

Stephen Gilbert

Date

2000-05-11

Definition at line 504 of file pdstemplates.c .

References getpdsindex() , and templatespds .

Referenced by extpdstemplate() , g2_addfield() , and g2_unpack4() .

g2int getpoly (unsigned char * csec3, g2int * jj, g2int * kk, g2int * mm)

This subroutine returns the J, K, and M pentagonal resolution parameters specified in a GRIB Grid Definition Section (GDS) used spherical harmonic coefficients using GDT 5.50 through 5.53. If 51 - complex data spectral packing is used as the data representation template number (see Table 5.0 ), then the Grid Definition Template Number in section 3 should be one of:

	•		50: Spherical Harmonic Coefficients (See Template 3.50)
	•		51: Rotated Spherical Harmonic Coefficients (See Template 3.51)
	•		52: Stretched Spherical Harmonic Coefficients (See Template 3.52)
	•		53: Rotated and Stretched Spherical Harmonic Coefficients (See Template 3.53)

Parameters

csec3 Character array that contains the packed GRIB2 GDS.
jj J pentagonal resolution parameter.
kk K pentagonal resolution parameter.
mm M pentagonal resolution parameter.

Returns

always returns 0.

Note

Returns jj, kk, and mm set to zero, if grid template not recognized.

Author

Stephen Gilbert

Date

2002-12-11

Definition at line 40 of file getpoly.c .

References g2_unpack3() .

Referenced by g2_addfield() .

double int_power (double x, g2int y)

Function similar to C pow() power function.

Parameters

x The base value whose power is to be calculated.
y The power value.

Returns

x**y

Author

Wesley Ebisuzaki

Definition at line 18 of file int_power.c .

Referenced by aecpack_int() , aecunpack_int() , compack() , comunpack() , jpcpack_int() , jpcunpack_int() , misspack() , mkieee() , pngpack_int() , pngunpack_int() , rdieee() , simpack() , simunpack() , and specunpack() .

void jpcpack (float * fld, g2int width, g2int height, g2int * idrstmpl,unsigned char * cpack, g2int * lcpack)

This function packs up a float array into a JPEG2000 code stream. After the data are scaled, and the reference value is subtracted out, the data are treated as a grayscale image and passed to a JPEG2000 encoder.

This function also fills in GRIB2 Data Representation Template 5.40 or 5.40000 with the appropriate values.

Parameters

	•		0 Reference value - ignored on input, set by jpcpack routine.
	•		1 Binary Scale Factor - used on input, unchanged by jpcpack routine.
	•		2 Decimal Scale Factor - used on input, unchanged by jpcpack routine.
	•		3 number of bits for each data value - ignored on input
	•		4 Original field type - currently ignored on input Data values assumed to be reals. Set to 0 on output.
	•		5 if 0 use lossless compression, if 1 use lossy compression.
	•		6 Desired compression ratio, if idrstmpl[5]=1. Set to 255, if idrstmpl[5]=0. May be modified in this function.

Author

Stephen Gilbert, Ed Hartnett

Definition at line 269 of file jpcpack.c .

References jpcpack_int() .

Referenced by g2_addfield() .

g2int jpcunpack (unsigned char * cpack, g2int len, g2int * idrstmpl, g2intndpts, float * fld)

Unpack JPEG2000 compressed data into an array of floats, using info from the GRIB2 Data Representation Template 5.40 or 5.40000.

Parameters

cpack The packed data.
len The length of the packed data.
idrstmpl Pointer to array of values for Data Representation Template 5.40 or 5.40000.
ndpts The number of data values to unpack.
fld A pointer that gets the unpacked data values as an array of float.

Returns

	•		G2C_NOERROR No error.
	•		G2_JPCUNPACK_MEM Out of memory.

Author

Stephem Gilbert

Date

2003-08-27

Definition at line 123 of file jpcunpack.c .

References G2_JPCUNPACK_MEM , jpcunpack_int() , and LOG .

Referenced by g2c_unpack7_int() .

void misspack (float * fld, g2int ndpts, g2int idrsnum, g2int * idrstmpl,unsigned char * cpack, g2int * lcpack)

Pack a data field using a complex packing algorithm. This funciton supports GRIB2 complex packing templates with or without spatial differences (See Template 5.2 and Template 5.3 ).

This function fills in GRIB2 Data Representation template arrays with the appropriate values.

Parameters

fld Contains the data values to pack
ndpts The number of data values in array fld
idrsnum Data Representation Template number. Must equal 2 or 3.
idrstmpl Contains the array of values for Data Representation Template 5.2 or 5.3.

	•		0 Reference value - ignored on input, set by misspack routine.
	•		1 Binary Scale Factor - used on input.
	•		2 Decimal Scale Factor- used on input.
	•		6 Missing value management.
	•		7 Primary missing value.
	•		8 Secondary missing value.
	•		16 Order of Spatial Differencing (1 or 2).

cpack The packed data field (character*1 array).
lcpack length of packed field cpack.

Author

Stephen Gilbert

Date

2000-06-21

Definition at line 43 of file misspack.c .

References ALOG2 , int_power() , mkieee() , pack_gp() , rdieee() , sbit() , and sbits() .

Referenced by cmplxpack() .

void mkieee (float * a, g2int * rieee, g2int num)

Store a list of real values in 32-bit IEEE floating point format.

Parameters

a Input array of floating point values.
num Number of floating point values to convert.
rieee Output array of data values in 32-bit IEEE format stored in g2int integer array. rieee must be allocated with at least 4*num bytes of memory before calling this function.

Author

Stephen Gilbert

Date

2002-10-29

Definition at line 22 of file mkieee.c .

References int_power() .

Referenced by aecpack_int() , compack() , g2_addfield() , jpcpack_int() , misspack() , pngpack_int() , simpack() , and specpack() .

int pack_gp (g2int * kfildo, g2int * ic, g2int * nxy, g2int * is523, g2int* minpk, g2int * inc, g2int * missp, g2int * misss, g2int * jmin, g2int* jmax, g2int * lbit, g2int * nov, g2int * ndg, g2int * lx, g2int ibit, g2int jbit, g2int * kbit, g2int * novref, g2int * lbitref,g2int * ier)

Determines groups of variable size, but at least of size minpk, the associated max (jmax( )) and min (jmin( )), the number of bits necessary to hold the values in each group (lbit( )), the number of values in each group (nov( )), the number of bits necessary to pack the jmin( ) values (ibit), the number of bits necessary to pack the lbit( ) values (jbit), and the number of bits necessary to pack the nov( ) values (kbit). The routine is designed to determine the groups such that a small number of bits is necessary to pack the data without excessive computations. If all values in the group are zero, the number of bits to use in packing is defined as zero when there can be no missing values; when there can be missing values, the number of bits must be at least 1 to have the capability to recognize the missing value. However, if all values in a group are missing, the number of bits needed is 0, and the unpacker recognizes this. All variables are g2int. Even though the groups are initially of size minpk or larger, an adjustment between two groups (the lookback procedure) may make a group smaller than minpk. The control on group size is that the sum of the sizes of the two consecutive groups, each of size minpk or larger, is not decreased. When determining the number of bits necessary for packing, the largest value that can be accommodated in, say, mbits, is 2**mbits-1; this largest value (and the next smallest value) is reserved for the missing value indicator (only) when is523 ne 0. If the dimension ndg is not large enough to hold all the groups, the local value of minpk is increased by 50 percent. This is repeated until ndg will suffice. A diagnostic is printed whenever this happens, which should be very rarely. If it happens often, ndg in subroutine pack should be increased and a corresponding increase in subroutine unpack made. Considerable code is provided so that no more checking for missing values within loops is done than necessary; the added efficiency of this is relatively minor, but does no harm. For grib2, the reference value for the length of groups in nov( ) and for the number of bits necessary to pack group values are determined, and subtracted before jbit and kbit are determined.

When 1 or more groups are large compared to the others, the width of all groups must be as large as the largest. A subroutine reduce breaks up large groups into 2 or more to reduce total bits required. If reduce should abort, pack_gp will be executed again without the call to reduce.

PROGRAM HISTORY LOG:

	•		February 1994 Glahn tdl mos-2000
	•		June 1995 Glahn modified for lmiss error.
	•		July 1996 Glahn added misss
	•		February 1997 Glahn removed 4 redundant tests for missp.eq.0; inserted a test to better handle a string of 9999’s
	•		February 1997 Glahn added loops to eliminate test for misss when misss = 0
	•		March 1997 Glahn corrected for secondary missing value
	•		March 1997 Glahn corrected for use of local value of minpk
	•		March 1997 Glahn corrected for secondary missing value
	•		March 1997 Glahn changed calculating number of bits through exponents to an array (improved overall packing performance by about 35 percent!). allowed 0 bits for packing jmin( ), lbit( ), and nov( ).
	•		May 1997 Glahn a number of changes for efficiency. mod functions eliminated and one ifthen added. jount removed. recomputation of bits not made unless necessary after moving points from one group to another. nendb adjusted to eliminate possibility of very small group at the end. about 8 percent improvement in overall packing. iskipa removed; there is always a group b that can become group a. control on size of group b (statement below 150) added. added adda, and use of ge and le instead of gt and lt in loops between 150 and 160. ibitbs added to shorten trips through loop.
	•		March 2000 Glahn modified for grib2; changed name from packgp
	•		january 2001 Glahn comments; ier = 706 substituted for stops; added return1; removed statement number 110; added ier and * return
	•		November 2001 Glahn changed some diagnostic formats to allow printing larger numbers
	•		November 2001 Glahn added misslx( ) to put maximum value into jmin( ) when all values missing to agree with grib standard.
	•		November 2001 Glahn changed two tests on missp and misss eq 0 to tests on is523. however, missp and misss cannot in general be = 0.
	•		November 2001 Glahn added call to reduce; defined itest before loops to reduce computation; started large group when all same value
	•		December 2001 Glahn modified and added a few comments
	•		January 2002 Glahn removed loop before 150 to determine a group of all same value
	•		January 2002 Glahn changed mallow from 9999999 to 2**30+1, and made it a parameter
	•		March 2002 Glahn added non fatal ier = 716, 717; removed nendb=nxy above 150; added iersav=0; comments

DATA SET USE

•

kfildo - unit number for output (print) file. (output)

Parameters

kfildo unit number for output (print) file. (input)
ic array to hold data for packing. the values do not have to be positive at this point, but must be in the range -2**30 to +2**30 (the the value of mallow). these g2int values will be retained exactly through packing and unpacking. (input)
nxy number of values in ic( ). also treated as its dimension. (input)
is523 missing value management 0=data contains no missing values 1=data contains primary missing values 2=data contains primary and secondary missing values (input)
minpk the minimum size of each group, except possibly the last one. (input)
inc the number of values to add to an already existing group in determining whether or not to start a new group. ideally, this would be 1, but each time inc values are attempted, the max and min of the next minpk values must be found. this is ’a loop within a loop,’ and a slightly larger value may give about as good results with slightly less computational time. if inc is le 0, 1 is used, and a diagnostic is output. note: it is expected that inc will equal 1. the code uses inc primarily in the loops starting at statement 180. if inc were 1, there would not need to be loops as such. however, kinc (the local value of inc) is set ge 1 when near the end of the data to forestall a very small group at the end. (input)
missp when missing points can be present in the data, they will have the value missp or misss. missp is the primary missing value and misss is the secondary missing value . these must not be values that would occur with subtracting the minimum (reference) value or scaling. for example, missp = 0 would not be advisable. (input)
misss secondary missing value indicator (see missp). (input)
jmin the minimum of each group (j=1,lx). (output)
jmax the maximum of each group (j=1,lx). this is not really needed, but since the max of each group must be found, saving it here is cheap in case the user wants it. (output)
lbit the number of bits necessary to pack each group (j=1,lx). it is assumed the minimum of each group will be removed before packing, and the values to pack will, therefore, all be positive. however, ic( ) does not necessarily contain all positive values. if the overall minimum has been removed (the usual case), then ic( ) will contain only positive values. (output)
nov the number of values in each group (j=1,lx). (output)
ndg the dimension of jmin, jmax, lbit, and nov. (input)
lx the number of groups determined. (output)
ibit the number of bits necessary to pack the jmin(j) values, j=1,lx. (output)
jbit the number of bits necessary to pack the lbit(j) values, j=1,lx. (output)
kbit the number of bits necessary to pack the nov(j) values, j=1,lx. (output)
novref reference value for nov( ). (output)
lbitref reference value for lbit( ). (output)
ier Error code

	•		0 No error.
	•		706 value will not pack in 30 bits--fatal
	•		714 error in reduce--non-fatal
	•		715 ngp not large enough in reduce--non-fatal
	•		716 minpk inceased--non-fatal
	•		717 inc set
	•		1--non-fatal
	•		alternate return when ier ne 0 and fatal error.

Returns

0 - check ier for error code.

INTERNAL VARIABLES

cfeed = contains the character representation
of a printer form feed.
ifeed = contains the g2int value of a printer
form feed.
kinc = working copy of inc. may be modified.
mina = minimum value in group a.
maxa = maximum value in group a.
nenda = the place in ic( ) where group a ends.
kstart = the place in ic( ) where group a starts.
ibita = number of bits needed to hold values in group a.
minb = minimum value in group b.
maxb = maximum value in group b.
nendb = the place in ic( ) where group b ends.
ibitb = number of bits needed to hold values in group b.
minc = minimum value in group c.
maxc = maximum value in group c.
ktotal = count of number of values in ic( ) processed.
nount = number of values added to group a.
lmiss = 0 when is523 = 0. when packing into a
specific number of bits, say mbits,
the maximum value that can be handled is
2**mbits-1. when is523 = 1, indicating
primary missing values, this maximum value
is reserved to hold the primary missing value
indicator and lmiss = 1. when is523 = 2,
the value just below the maximum i.e.,
2**mbits-2 is reserved to hold the secondary
missing value indicator and lmiss = 2.
lminpk = local value of minpk. this will be adjusted
upward whenever ndg is not large enough to hold
all the groups.
mallow = the largest allowable value for packing.
mislla = set to 1 when all values in group a are missing.
this is used to distinguish between a real
minimum when all values are not missing
and a minimum that has been set to zero when
all values are missing. 0 otherwise.
note that this does not distinguish between
primary and secondary missings when secondary
missings are present. this means that
lbit( ) will not be zero with the resulting
compression efficiency when secondary missings
are present. also note that a check has been
made earlier to determine that secondary
missings are really there.
misllb = set to 1 when all values in group b are missing.
this is used to distinguish between a real
minimum when all values are not missing
and a minimum that has been set to zero when
all values are missing. 0 otherwise.
misllc = performs the same function for group c that
mislla and misllb do for groups b and c,
respectively.
ibxx2(j) = an array that when this routine is first entered
is set to 2**j, j=0,30. ibxx2(30) = 2**30, which
is the largest value packable, because 2**31
is larger than the g2int word size.
ifirst = set by data statement to 0. changed to 1 on
first
entry when ibxx2( ) is filled.
minak = keeps track of the location in ic( ) where the
minimum value in group a is located.
maxak = does the same as minak, except for the maximum.
minbk = the same as minak for group b.
maxbk = the same as maxak for group b.
minck = the same as minak for group c.
maxck = the same as maxak for group c.
adda = keeps track whether or not an attempt to add
points to group a was made. if so, then adda
keeps from trying to put one back into b.
(g2int)
ibitbs = keeps current value if ibitb so that loop
ending at 166 doesn’t have to start at
ibitb = 0 every time.
misslx(j) = mallow except when a group is all one value (and
lbit(j) = 0) and that value is missing. in
that case, misslx(j) is missp or misss. this
gets inserted into jmin(j) later as the
missing indicator; it can’t be put in until
the end, because jmin( ) is used to calculate
the maximum number of bits (ibits) needed to
pack jmin( ).

Definition at line 255 of file pack_gp.c .

References FALSE_ , reduce() , and TRUE_ .

Referenced by compack() , and misspack() .

void pngpack (float * fld, g2int width, g2int height, g2int * idrstmpl,unsigned char * cpack, g2int * lcpack)

This subroutine packs up a float data field into PNG image format. After the data field is scaled, and the reference value is subtracted out, it is treated as a grayscale image and passed to a PNG encoder. It also fills in GRIB2 Data Representation Template 5.41 or 5.40010 with the appropriate values.

Parameters

fld Pointer to array of float that contains the data values to pack.
width Number of points in the x direction.
height Number of points in the y direction.
idrstmpl Contains the array of values for Data Representation Template 5.41 or 5.40010.

	•		0 Reference value - ignored on input, set by pngpack routine.
	•		1 Binary Scale Factor - used on input.
	•		2 Decimal Scale Factor - used on input.
	•		3 number of bits for each grayscale pixel value - ignored on input.
	•		4 Original field type - currently ignored on input, set = 0 on output. Data values assumed to be reals.

cpack The packed data field.
lcpack length of packed field cpack.

Author

Stephen Gilbert

Date

2003-08-27

Author

Ed Hartnett

Definition at line 254 of file pngpack.c .

References pngpack_int() .

Referenced by g2_addfield() .

g2int pngunpack (unsigned char * cpack, g2int len, g2int * idrstmpl, g2intndpts, float * fld)

This subroutine unpacks a data field that was packed into a PNG image format using info from the GRIB2 Data Representation Template 5.41 or 5.40010.

Parameters

cpack The packed data field (character*1 array).
len length of packed field cpack().
idrstmpl Pointer to array of values for Data Representation Template 5.41 or 5.40010.
ndpts The number of data values to unpack.
fld Contains the unpacked data values.

Returns

	•		G2C_NOERROR No error.
	•		G2_JPCUNPACK_MEM Out of memory.

Author

Stephen Gilbert

Date

2003-08-27

Author

Ed Hartnett

Definition at line 126 of file pngunpack.c .

References G2_JPCUNPACK_MEM , G2C_ENOMEM , and pngunpack_int() .

Referenced by g2c_unpack7_int() .

void rdieee (g2int * rieee, float * a, g2int num)

Read a list of real values in 32-bit IEEE floating point format.

Parameters

rieee g2int array of floating point values in 32-bit IEEE format.
num Number of floating point values to convert.
a float array of real values. a must be allocated with at least 4*num bytes of memory before calling this function.

Author

Stephen Gilbert

Date

2002-10-25

Definition at line 20 of file rdieee.c .

References int_power() .

Referenced by aecunpack_int() , comunpack() , g2_miss() , g2_unpack4() , g2c_unpack7_int() , jpcunpack_int() , misspack() , pngunpack_int() , simunpack() , and specunpack() .

void sbit (unsigned char * out, g2int * in, g2int iskip, g2int nbits)

Store arbitrary size values into a packed bit string, taking the low order bits from each value in the unpacked array.

Parameters

out Pointer to packed array output. Must be allocated large enough to hold output.
in Pointer that gets the unpacked array input.
iskip Initial number of bits to skip.
nbits Number of bits to pack.

Author

NOAA Programmer

Definition at line 38 of file gbits.c .

References sbits() .

Referenced by compack() , g2_addfield() , g2_addgrid() , g2_addlocal() , g2_create() , g2_gribend() , misspack() , and simpack() .

void sbits (unsigned char * out, g2int * in, g2int iskip, g2int nbits,g2int nskip, g2int n)

Store arbitrary size values into a packed bit string, taking the low order bits from each value in the unpacked array.

Parameters

Author

NOAA Programmer

Definition at line 178 of file gbits.c .

Referenced by aecpack_int() , compack() , g2_addfield() , g2_addgrid() , jpcpack_int() , misspack() , pngpack_int() , sbit() , and simpack() .

void simpack (float * fld, g2int ndpts, g2int * idrstmpl, unsigned char cpack, g2int lcpack)

Packs a data field using the simple packing algorithm. This function also fills in GRIB2 Data Representation Template 5.0 with the appropriate values.

Parameters

fld Contains the data values to pack.
ndpts The number of data values in array fld.
idrstmpl Contains the array of values for [Data Representation Template 5.0](https://www.nco.ncep.noaa.gov/pmb/docs/grib2/grib2_doc/grib2_temp5-0.shtml).

	•		0 Reference value - ignored on input - set by simpack routine.
	•		1 Binary Scale Factor - unchanged from input.
	•		2 Decimal Scale Factor - unchanged from input.
	•		3 Number of bits used to pack data, if value is > 0 and <= 31. If this input value is 0 or outside above range then the num of bits is calculated based on given data and scale factors.
	•		4 Original field type - currently ignored on input. Data values assumed to be reals. Set to 0 by simpack routine.

cpack The packed data field
lcpack length of packed field starting at cpack.

Author

Stephen Gilbert

Date

2002-11-06

Definition at line 36 of file simpack.c .

References ALOG2 , int_power() , LOG , mkieee() , sbit() , and sbits() .

Referenced by g2_addfield() , and specpack() .

g2int simunpack (unsigned char * cpack, g2int * idrstmpl, g2int ndpts,float * fld)

Unpack a data field that was packed using a simple packing algorithm, using info from the GRIB2 Data Representation Template 5.0.

Parameters

cpack pointer to the packed data field.
idrstmpl pointer to the array of values for Data Representation Template 5.0.
ndpts The number of data values to unpack.
fld A pointer that gets the unpacked data values. fld must be ‘* allocated with at least ndpts * sizeof(float) bytes before calling this routine.

Returns

0 for success, error code otherwise.

Author

Stephen Gilbert

Date

2002-10-29

Definition at line 28 of file simunpack.c .

References G2_JPCUNPACK_MEM , G2_NO_ERROR , gbits() , int_power() , LOG , and rdieee() .

Referenced by g2c_unpack7_int() .

void specpack (float * fld, g2int ndpts, g2int JJ, g2int KK, g2int MM,g2int * idrstmpl, unsigned char * cpack, g2int * lcpack)

Pack a spectral data field using the complex packing algorithm for spherical harmonic data as defined in the GRIB2 Data Representation Template 5.51 .

Parameters

fld Contains the data values to be packed.
ndpts The number of data values to pack.
JJ J - pentagonal resolution parameter.
KK K - pentagonal resolution parameter.
MM M - pentagonal resolution parameter.
idrstmpl Contains the array of 10 values for [Data Representation Template 5.51](https://www.nco.ncep.noaa.gov/pmb/docs/grib2/grib2_doc/grib2_temp5-51.shtml).
cpack Pointer that gets the packed data field. Must be allocated by caller.
lcpack length of packed field cpack.

Author

Stephen Gilbert

Date

2002-12-19

Definition at line 33 of file specpack.c .

References mkieee() , and simpack() .

Referenced by g2_addfield() .

g2int specunpack (unsigned char * cpack, g2int * idrstmpl, g2int ndpts,g2int JJ, g2int KK, g2int MM, float * fld)

Unpack a spectral data field that was packed using the complex packing algorithm for spherical harmonic data as defined in the GRIB2 documention, using info from the GRIB2 Data Representation Template 5.51 .

Parameters

cpack pointer to the packed data field.
idrstmpl pointer to the array of values for Data Representation Template 5.51.
ndpts The number of data values to unpack (real and imaginary parts).
JJ pentagonal resolution parameter.
KK pentagonal resolution parameter.
MM pentagonal resolution parameter.
fld Contains the unpacked data values. fld must be allocated with at least ndpts * sizeof(float) bytes before calling this routine.

Returns

0 for success, -3 for wrong type.

Author

Stephen Gilbert

Date

2000-06-21

Definition at line 35 of file specunpack.c .

References G2_NO_ERROR , G2_SPECUNPACK_TYPE , gbits() , int_power() , and rdieee() .

Referenced by g2c_unpack7_int() .

Author

Generated automatically by Doxygen for NCEPLIBS-g2c from the source code.

Man page - jpcunpack(3)

Packages contains this manual

Manual

grib2_int.h

NAME

SYNOPSIS

Data Structures

Macros

Typedefs

Functions

Detailed Description

Data Type Documentation

struct g2c_code_table

struct g2c_dim_info

struct g2c_entry

struct g2c_file_info

struct g2c_message_info

struct g2c_param

struct g2c_section3_info

struct g2c_section4_info

struct g2c_section5_info

struct g2c_section6_info

struct g2c_section_info

struct gtemplate

Macro Definition Documentation

#define ALOG2 (0.69314718)

#define BYTE 8

#define EIGHT_BYTES 8

#define EXTERN_MUTEX(m)

#define FOUR_BYTES 4

#define G2C_FILE_READ 0

#define G2C_FILE_WRITE 1

#define G2C_INDEX1_BDS_VAL_LEN 10

#define G2C_INDEX1_BMS_VAL_LEN 5

#define G2C_INDEX1_GDS_VAL2_LEN 27

#define G2C_INDEX1_GDS_VAL_LEN 41

#define G2C_INDEX1_PDS_VAL2_LEN 27

#define G2C_INDEX1_PDS_VAL3_LEN 27

#define G2C_INDEX1_PDS_VAL_LEN 27

#define G2C_JASPER_JPEG_FORMAT_NAME ’jpc’

#define G2C_MAGIC_HEADER ’GRIB’

#define G2C_MAGIC_HEADER_LEN 8

#define G2C_MAX_MESSAGES 1024

#define G2C_MIN_MAX_BYTES 16

#define hton64(y) (((uint64_t)htonl(y)) << WORD | htonl(y >> WORD))

#define LATITUDE ’Latitude’

#define LOG(e)

#define LONGITUDE ’Longitude’

#define MUTEX(m)

#define MUTEX_LOCK(m)

#define MUTEX_UNLOCK(m)

#define ntoh64(y) (((uint64_t)ntohl(y)) << WORD | ntohl(y >> WORD))

#define ONE_BYTE 1

#define TWO_BYTES 2

#define WORD 32

Typedef Documentation

typedef struct g2c_entry G2C_CODE_ENTRY_T

typedef struct g2c_code_table G2C_CODE_TABLE_T

typedef struct g2c_dim_info G2C_DIM_INFO_T

typedef struct g2c_file_info G2C_FILE_INFO_T

typedef struct g2c_message_info G2C_MESSAGE_INFO_T

typedef struct g2c_param G2C_PARAM_T

typedef struct g2c_section3_info G2C_SECTION3_INFO_T

typedef struct g2c_section4_info G2C_SECTION4_INFO_T

typedef struct g2c_section5_info G2C_SECTION5_INFO_T

typedef struct g2c_section6_info G2C_SECTION6_INFO_T

typedef struct g2c_section_info G2C_SECTION_INFO_T

typedef struct gtemplate gtemplate

Function Documentation

int add_msg (G2C_FILE_INFO_T * file, int msg_num, size_t bytes_to_msg,size_t bytes_in_msg, int read_file, G2C_MESSAGE_INFO_T ** msg)

int add_section (FILE * f, G2C_MESSAGE_INFO_T * msg, int sec_id, unsignedint sec_len, size_t bytes_to_sec, unsigned char sec_num)

void aecpack (float * fld, g2int width, g2int height, g2int * idrstmpl,unsigned char * cpack, g2int * lcpack)

g2int aecunpack (unsigned char * cpack, g2int len, g2int * idrstmpl, g2intndpts, float * fld)

void cmplxpack (float * fld, g2int ndpts, g2int idrsnum, g2int * idrstmpl,unsigned char * cpack, g2int * lcpack)

void compack (float * fld, g2int ndpts, g2int idrsnum, g2int * idrstmpl,unsigned char * cpack, g2int * lcpack)

int comunpack (unsigned char * cpack, g2int lensec, g2int idrsnum, g2int *idrstmpl, g2int ndpts, float * fld)

Program History Log

int dec_aec (unsigned char * cpack, g2int len, g2int nbits, g2int flags,g2int block_size, g2int rsi, unsigned char * cfld, g2int cfldlen)

int dec_jpeg2000 (char * injpc, g2int bufsize, g2int * outfld)

int dec_png (unsigned char * pngbuf, g2int * width, g2int * height,unsigned char * cout)

int comunpack (unsigned char * cpack, g2int lensec, g2int idrsnum, g2int idrstmpl, g2int ndpts, float fld)

int pack_gp (g2int * kfildo, g2int * ic, g2int * nxy, g2int * is523, g2int* minpk, g2int * inc, g2int * missp, g2int * misss, g2int * jmin, g2int* jmax, g2int * lbit, g2int * nov, g2int * ndg, g2int * lx, g2int ibit, g2int jbit, g2int * kbit, g2int * novref, g2int * lbitref,g2int * ier)

void simpack (float * fld, g2int ndpts, g2int * idrstmpl, unsigned char cpack, g2int lcpack)