Man page - uhd_siggen_gui(1)
Packages contains this manual
- gr-ctrlport-monitor(1)
- uhd_siggen_gui(1)
- polar_channel_construction(1)
- gr_modtool(1)
- gr-perf-monitorx(1)
- gnuradio-companion(1)
- gr_plot_psd(1)
- gr_plot_const(1)
- dial_tone(1)
- grcc(1)
- gr_plot_time(1)
- uhd_siggen(1)
- display_qt(1)
- tags_demo(1)
- uhd_rx_cfile(1)
- gnuradio-config-info(1)
- uhd_fft(1)
- gr_plot_fft(1)
- gr_read_file_metadata(1)
- uhd_rx_nogui(1)
- gr_plot(1)
- gr_plot_qt(1)
- gr_plot_iq(1)
- gr_filter_design(1)
apt-get install gnuradio
Manual
UHD_SIGGEN_GUI
NAMESYNOPSIS
DESCRIPTION
OPTIONS
SEE ALSO
NAME
uhd_siggen_gui - GNU Radio signal generator using UHD hardware
SYNOPSIS
uhd_siggen_gui: [ options ]
DESCRIPTION
GUI to allow UHD supported hardware to be a signal generator.
OPTIONS
-h , --help
show this help message and exit
-a ARGS, --args = ARGS
UHD device address args , [default=]
--spec = SPEC
Subdevice of UHD device where appropriate
-A ANTENNA, --antenna = ANTENNA
select Rx Antenna where appropriate
-s SAMP_RATE, --samp-rate = SAMP_RATE
set sample rate (bandwidth) [default=1000000.0]
-g GAIN, --gain = GAIN
set gain in dB (default is midpoint)
-f FREQ, --tx-freq = FREQ
Set carrier frequency to FREQ [default=mid-point]
-x WAVEFORM_FREQ, --waveform-freq = WAVEFORM_FREQ
Set baseband waveform frequency to FREQ [default=0]
-y WAVEFORM2_FREQ, --waveform2-freq = WAVEFORM2_FREQ
Set 2nd waveform frequency to FREQ [default=none]
|
--sine |
Generate a carrier modulated by a complex sine wave |
--const
Generate a constant carrier
--offset = OFFSET
Set waveform phase offset to OFFSET [default=0]
--gaussian
Generate Gaussian random output
--uniform
Generate Uniform random output
--2tone
Generate Two Tone signal for IMD testing
--sweep
Generate a swept sine wave
--amplitude = AMPL
Set output amplitude to AMPL (0.0-1.0) [default=0.15]
-v , --verbose
Use verbose console output [default=False]
SEE ALSO
uhd_siggen(1)