Man page - rtl_wmbus(1)

Packages contains this manual

Package: rtl-wmbus
apt-get install rtl-wmbus

Manuals in package:

rtl_wmbus(1)

Documentations in package:

rtl-wmbus

Manual

RTL_WMBUS:

NAME
DESCRIPTION
Usage ./build/rtl_wmbus:
Usage ./build/rtl_wmbus:

NAME

rtl_wmbus: - software defined receiver for Wireless M-Bus

DESCRIPTION

rtl_wmbus: 1.1.0-1˜bpo13+1

Usage ./build/rtl_wmbus:

	-o remove DC offset
	-a accelerate (use an inaccurate atan version)
	-r 0 to disable run length algorithm
	-t 0 to disable time2 algorithm
	-d 2 set decimation rate to 2 (defaults to 2 if omitted)
	-v show used algorithm in the output
	-V show version
	-s receive S1 and T1/C1 datagrams simultaneously. rtl_sdr _MUST_ be set to 868.625MHz ( -f 868.625M)
	-p [T,S] to disable processing T1/C1 or S1 mode
	-f exit if incoming data stalled for 5 seconds
	-h print this help

Usage ./build/rtl_wmbus:

	-o remove DC offset
	-a accelerate (use an inaccurate atan version)
	-r 0 to disable run length algorithm
	-t 0 to disable time2 algorithm
	-d 2 set decimation rate to 2 (defaults to 2 if omitted)
	-v show used algorithm in the output
	-V show version
	-s receive S1 and T1/C1 datagrams simultaneously. rtl_sdr _MUST_ be set to 868.625MHz ( -f 868.625M)
	-p [T,S] to disable processing T1/C1 or S1 mode
	-f exit if incoming data stalled for 5 seconds
	-h print this help