Man page - qmi-firmware-update(1)

Packages contains this manual

Package: libqmi-utils
apt-get install libqmi-utils

Manuals in package:

Documentations in package:

libqmi-utils

Manual

QMI-FIRMWARE-UPDATE

NAME
DESCRIPTION
Usage:
Generic device selection options:
Update options (normal mode):
Reset options (normal mode):
Update options (download mode):
Verify options:
Application Options:
SEE ALSO

NAME

qmi-firmware-update - Update firmware in QMI devices

DESCRIPTION

Usage:

qmi-firmware-update [OPTION?] FILE1 FILE2... - Update firmware in QMI devices

Generic device selection options:

-s , --busnum-devnum = [BUS :]DEV

Select device by bus and device number (in decimal).

-d , --vid-pid = VID[ :PID]

Select device by device vendor and product id (in hexadecimal).

-w , --cdc-wdm = [PATH]

Select device by QMI/MBIM cdc-wdm device path (e.g. /dev/cdc-wdm0 ).

-t , --tty = [PATH]

Select device by serial device path (e.g. /dev/ttyUSB2 ).

Update options (normal mode):

-u , --update

Launch firmware update process.

-f , --firmware-version = [VERSION]

Firmware version (e.g. ’05.05.58.00’).

-c , --config-version = [VERSION]

Config version (e.g. ’005.025_002’).

-C , --carrier = [CARRIER]

Carrier name (e.g. ’Generic’).

--ignore-version-errors

Run update operation even with version string errors.

--override-download

Download images even if module says it already has them.

--modem-storage-index = [INDEX]

Index storage for the modem image.

--skip-validation

Don’t wait to validate the running firmware after update.

Reset options (normal mode):

-b , --reset

Reset device into download mode.

Update options (download mode):

-U , --update-download

Launch firmware update process while in download (boot & hold) mode.

Verify options:

-z , --verify

Analyze and verify firmware images.

Application Options:

-p , --device-open-proxy

Request to use the ’qmi-proxy’ proxy.

--device-open-qmi

Open a cdc-wdm device explicitly in QMI mode

--device-open-mbim

Open a cdc-wdm device explicitly in MBIM mode

--device-open-auto

Open a cdc-wdm device in either QMI or MBIM mode (default)

--ignore-mm-runtime-check

Ignore ModemManager runtime check

-v , --verbose

Run action with verbose messages in standard output, including the debug ones.

-S , --silent

Run action with no messages in standard output; not even the error ones.

-L , --verbose-log = [PATH]

Write verbose messages to an output file.

-V , --version

Print version.

-h , --help

Show help.

-H , --help-examples

Show help examples.

***************************************************************************

Warning!

***************************************************************************

Use this program with caution. The authors take *no* responsibility if any device gets broken as a result of using this program.

Please report issues to the libqmi mailing list at:

libqmi-devel@lists.freedesktop.org

qmi-firmware-update 1.36.0

License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl-2.0.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law.