Man page - perltrap(1)

Packages contains this manual

Manual

PERLTRAP

NAME
DESCRIPTION
Awk Traps
C/C++ Traps
JavaScript Traps
Sed Traps
Shell Traps
Perl Traps

NAME

perltrap - Perl traps for the unwary

DESCRIPTION

The biggest trap of all is forgetting to "use warnings" or use the -w switch; see warnings and "-w" in perlrun. The second biggest trap is not making your entire program runnable under "use strict". The third biggest trap is not reading the list of changes in this version of Perl; see perldelta.

Awk Traps

Accustomed awk users should take special note of the following:

•

A Perl program executes only once, not once for each input line. You can do an implicit loop with "-n" or "-p".

•

The English module, loaded via

use English;

allows you to refer to special variables (like $/) with names (like $RS), as though they were in awk ; see perlvar for details.

•

Semicolons are required after all simple statements in Perl (except at the end of a block). Newline is not a statement delimiter.

•

Curly brackets are required on "if"s and "while"s.

•

Variables begin with "$", "@" or "%" in Perl.

•

Arrays index from 0. Likewise string positions in substr() and index() .

•

You have to decide whether your array has numeric or string indices.

•

Hash values do not spring into existence upon mere reference.

•

You have to decide whether you want to use string or numeric comparisons.

•

Reading an input line does not split it for you. You get to split it to an array yourself. And the split() operator has different arguments than awk ’s.

•

The current input line is normally in $_, not $0. It generally does not have the newline stripped. ($0 is the name of the program executed.) See perlvar.

•

$< digit > does not refer to fields--it refers to substrings matched by the last match pattern.

•

The print() statement does not add field and record separators unless you set $, and "$\". You can set $OFS and $ORS if you’re using the English module.

•

You must open your files before you print to them.

•

The range operator is "..", not comma. The comma operator works as in C.

•

The match operator is "=˜", not "˜". ("˜" is the one’s complement operator, as in C.)

•

The exponentiation operator is "**", not "ˆ". "ˆ" is the XOR operator, as in C. (You know, one could get the feeling that awk is basically incompatible with C.)

•

The concatenation operator is ".", not the null string. (Using the null string would render "/pat/ /pat/" unparsable, because the third slash would be interpreted as a division operator--the tokenizer is in fact slightly context sensitive for operators like "/", "?", and ">". And in fact, "." itself can be the beginning of a number.)

•

The "next", "exit", and "continue" keywords work differently.

•

The following variables work differently:

Awk Perl
ARGC scalar @ARGV (compare with $#ARGV)
ARGV[0] $0
FILENAME $ARGV
FNR $. - something
FS (whatever you like)
NF $#Fld, or some such
NR $.
OFMT $#
OFS $,
ORS $\
RLENGTH length($&)
RS $/
RSTART length($`)
SUBSEP $;

•

You cannot set $RS to a pattern, only a string.

•

When in doubt, run the awk construct through a2p and see what it gives you.

C/C++ Traps

Cerebral C and C++ programmers should take note of the following:

•

Curly brackets are required on "if"’s and "while"’s.

•

You must use "elsif" rather than "else if".

•

The "break" and "continue" keywords from C become in Perl "last" and "next", respectively. Unlike in C, these do not work within a "do { } while" construct. See "Loop Control" in perlsyn.

•

The switch statement is called "given"/"when" and only available in perl 5.10 or newer. See "Switch Statements" in perlsyn.

•

Variables begin with "$", "@" or "%" in Perl.

•

Comments begin with "#", not "/*" or "//". Perl may interpret C/C++ comments as division operators, unterminated regular expressions or the defined-or operator.

•

You can’t take the address of anything, although a similar operator in Perl is the backslash, which creates a reference.

•

"ARGV" must be capitalized. $ARGV[0] is C’s "argv[1]", and "argv[0]" ends up in $0.

•

System calls such as link() , unlink() , rename() , etc. return nonzero for success, not 0. ( system() , however, returns zero for success.)

•

Signal handlers deal with signal names, not numbers. Use "kill -l" to find their names on your system.

JavaScript Traps

Judicious JavaScript programmers should take note of the following:

•

In Perl, binary "+" is always addition. "$string1 + $string2" converts both strings to numbers and then adds them. To concatenate two strings, use the "." operator.

•

The "+" unary operator doesn’t do anything in Perl. It exists to avoid syntactic ambiguities.

•

Unlike "for...in", Perl’s "for" (also spelled "foreach") does not allow the left-hand side to be an arbitrary expression. It must be a variable:

for my $variable (keys %hash) {
...
}

Furthermore, don’t forget the "keys" in there, as "foreach my $kv (%hash) {}" iterates over the keys and values, and is generally not useful ($kv would be a key, then a value, and so on).

•

To iterate over the indices of an array, use "foreach my $i (0 .. $#array) {}". "foreach my $v (@array) {}" iterates over the values.

•

Perl requires braces following "if", "while", "foreach", etc.

•

In Perl, "else if" is spelled "elsif".

•

"? :" has higher precedence than assignment. In JavaScript, one can write:

condition ? do_something() : variable = 3

and the variable is only assigned if the condition is false. In Perl, you need parentheses:

$condition ? do_something() : ($variable = 3);

Or just use "if".

•

Perl requires semicolons to separate statements.

•

Variables declared with "my" only affect code after the declaration. You cannot write "$x = 1; my $x;" and expect the first assignment to affect the same variable. It will instead assign to an $x declared previously in an outer scope, or to a global variable.

Note also that the variable is not visible until the following statement . This means that in "my $x = 1 + $x" the second $x refers to one declared previously.

•

"my" variables are scoped to the current block, not to the current function. If you write "{my $x;} $x;", the second $x does not refer to the one declared inside the block.

•

An object’s members cannot be made accessible as variables. The closest Perl equivalent to "with(object) { method() }" is "for", which can alias $_ to the object:

for ($object) {
$_->method;
}

•

The object or class on which a method is called is passed as one of the method’s arguments, not as a separate "this" value.

Sed Traps

Seasoned sed programmers should take note of the following:

•

A Perl program executes only once, not once for each input line. You can do an implicit loop with "-n" or "-p".

•

Backreferences in substitutions use "$" rather than "\".

•

The pattern matching metacharacters "(", ")", and "|" do not have backslashes in front.

•

The range operator is "...", rather than comma.

Shell Traps

Sharp shell programmers should take note of the following:

•

The backtick operator does variable interpolation without regard to the presence of single quotes in the command.

•

The backtick operator does no translation of the return value, unlike csh .

•

Shells (especially csh ) do several levels of substitution on each command line. Perl does substitution in only certain constructs such as double quotes, backticks, angle brackets, and search patterns.

•

Shells interpret scripts a little bit at a time. Perl compiles the entire program before executing it (except for "BEGIN" blocks, which execute at compile time).

•

The arguments are available via @ARGV, not $1, $2, etc.

•

The environment is not automatically made available as separate scalar variables.

•

The shell’s "test" uses "=", "!=", "<" etc for string comparisons and "-eq", "-ne", "-lt" etc for numeric comparisons. This is the reverse of Perl, which uses "eq", "ne", "lt" for string comparisons, and "==", "!=" "<" etc for numeric comparisons.

Perl Traps

Practicing Perl Programmers should take note of the following:

•

Remember that many operations behave differently in a list context than they do in a scalar one. See perldata for details.

•

Avoid barewords if you can, especially all lowercase ones. You can’t tell by just looking at it whether a bareword is a function or a string. By using quotes on strings and parentheses on function calls, you won’t ever get them confused.

•

You cannot discern from mere inspection which builtins are unary operators (like chop() and chdir() ) and which are list operators (like print() and unlink() ). (Unless prototyped, user-defined subroutines can only be list operators, never unary ones.) See perlop and perlsub.

•

People have a hard time remembering that some functions default to $_, or @ARGV, or whatever, but that others which you might expect to do not.

•

The <FH> construct is not the name of the filehandle, it is a readline operation on that handle. The data read is assigned to $_ only if the file read is the sole condition in a while loop:

while (<FH>) { }
while (defined($_ = <FH>)) { }..
<FH>; # data discarded!

•

Remember not to use "=" when you need "=˜"; these two constructs are quite different:

$x = /foo/;
$x =˜ /foo/;

•

The "do {}" construct isn’t a real loop that you can use loop control on.

•

Use my() for local variables whenever you can get away with it (but see perlform for where you can’t). Using local() actually gives a local value to a global variable, which leaves you open to unforeseen side-effects of dynamic scoping.

•

If you localize an exported variable in a module, its exported value will not change. The local name becomes an alias to a new value but the external name is still an alias for the original.

As always, if any of these are ever officially declared as bugs, they’ll be fixed and removed.