Man page - icmake(1)

Packages contains this manual

Package: icmake
apt-get install icmake

Manuals in package:

Documentations in package:

icmake

Manual

icmake

NAME
SYNOPSIS
DESCRIPTION
ICMAKE V. 13.00.00
OPTIONS
EXECUTING ICMAKE SCRIPTS
ICM-DEP
ICM-MULTICOMP
ICM-SPCH
ICM-UN
FILES
EXAMPLES
SEE ALSO
BUGS
COPYRIGHT
AUTHOR

NAME

icmake - A program maintenance ( make ) utility using a C -like grammar

SYNOPSIS

icmake option(s) [source [dest]] [args]

DESCRIPTION

Icmake (1) is a generic tool for program maintenance which can be used as an alternative for, e.g., make (1). It’s a generic tool in that icmake -scripts, written in a language closely resembling the C programming language, can perform tasks that are traditionally the domain of scripting languages.

This man-page consists of the following sections:

	o		ICMAKE V. 13.00.00 covers the changes since icmake version 12.03.00;
	o		OPTIONS covers icmake ’s options;
	o		EXECUTING ICMAKE SCRIPTS covers how to call icmake scripts;
	o		ICM-DEP describes the icm-dep support program;
	o		ICM-MULTICOMP describes the icm-multicomp support program;
	o		ICM-SPCH describes the icm-spch support program;
	o		ICM-UN describes the icm-un support program;
	o		FILES provides an overvieuw of the locations of icmake and its support programs (as used by the Debian Linux distribution);
	o		EXAMPLES contains references to locations containing some examples;
	o		SEE ALSO contains references to man-pages of icmake support programs and man-pages of programs related to icmake . In particular

			icmstart (1), describes how to initialize a directory for ( C++ or C ) program development;
	o		icmbuild (1), covers how to use icmake for the maintenance of such programs.
	o		icmscript (7) covers the syntax and facilities of icmake ’s scripting language, allowing you to write your own icmake scripts.

Icmake allows programmers to use a scripting language (closely resembling the well-known C -programming language) to define the actions that are required for (complex) program maintenance. For this, icmake offers various special operators as well as a set of support functions that have shown their usefulness in program maintenance.

Icmake should not be confused with an Integrated Development Environment (IDE). Icmake merely performs tasks for which scripts can be written, and a minimal set of pre-defined scripts ( icmstart and icmbuild ) that have proven their usefulness when developing and maintaining programs are included in icmake’s distribution.

When using icmbuild (1) for program maintenance the following icmake support programs are used:

	o		icm-comp byte-code compiling an icmake script;
	o		icm-dep handling class-dependencies;
	o		icm-exec executing a byte-code compiled icmake script;
	o		icm-multicomp (optionally) using multi-threaded source file compilation;
	o		icm-pp pre-processing an icmake script;
	o		icm-spch (optionally) constructing a project-wide Single Pre-Compiled Hbeader file (SPCH).

In addition to the above programs the icmake project provides

	o		the icmodmap program can be used when developing C++ programs using modules (cf. the icmodmap (1) man-page);
	o		icm-un disassembling compiled icmake byte-code files (‘ bim-files ’). icm-un is primarily used for illustration, education, and debugging and is called by icmake when specifying its option --unassemble or -u (see also section ICMUN ).

Some make-utilities by default recompile sources once header files are modified. When developing C++ programs this is often not required, as adding new member functions to classes does not require the recompilatopm of all source files of those classes. Class dependencies are optionally inspected by icmbuld (1) (they are inspected when the USE_ALL, SPCH , and/or (now deprecated) PRECOMP #define directives in the icmconf file are activated (cf. the icmconf (7) man-page for details).

ICMAKE V. 13.00.00

In icmake version 13.00.00 the following modifications were implemented w.r.t. its version 12.03.00:

	o		option --all ( -a ) was added to the icm-spch program performing in sequence the actions of its --list, --precompile, and --soft-link options. Several existing options were altered. See the ICM-SPH section for details.
	o		the (internal) headers inspected by icmake --spch (or -S ) are not modified anymore.
	o		to remove the (now obsoleted) #ifndef SPCH_ specifications from files listed in existing spch files written by previous versions of icm-spch the program noifndef.cc , available in the icmake source distribution in its support/ sub-directory can be used to remove existing #ifnef SPCH_ sections from a project’s .ih files;
	o		icmake --source compiles the icmake script to a temporary .bim file;
	o		the support program icmun was renamed to icm-un (called by icmake when specifying the --unassemble ( -u ) option, so in practice the name change is automatically handled).
	o		The icmconf (7) script can use -o in its #define SPCH specification. All (space character delimited) words following -o are passed to icm-spch as separate ‘ -o word ’ options;
	o		When developing C++ programs the environment variable ICMAKE_CXXFLAGS is no longer used. Instead the environment variable ICMAKE_CPPSTD is used. Use this latter environment variable to define one point of maintenance specifying the version of the C++ standard used when compiling sources;
	o		When using Debian (or a comparable distributions) the script ’rebuild’ can be used to rebuild icmake’s binaries after installing ’libbobcat-dev’, resulting in a reduction of their sizes of about 40%.
	o		The icmake program itself was redesigned.

OPTIONS

Where available, single letter options are listed between parentheses beyond their associated long-option variants. Icmake defines action options and non-action options. The first action option that is encountered is used.

When using icmbuild (1) for program maintenance icmake is called automatically, and the user doesn’t have to specify any icmake options.

--about ( -a )

Ends icmake after showing some information about icmake ;

--compile ( -c ) [options] source [bim-file]

The icmake script is first pre-processed (see option --preprocess below) whereafter the pre-processed file is compiled by icm-comp producing a bim-file . If the bim-file name is not specified then source’s base-name, receiving extension .bim , is used.
If source is a previously pre-processed file then option -P can be specified to suppress its pre-processing. E.g.,

icmake -c -P source dest.bim

If the bim-file exists and is younger than source then source is not compiled;

--dependencies ( -d ) [options] action

The icm-dep program is called determining the dependencies among classes. All options and arguments following this option are forwarded to icm-dep . Refer to the ICM-DEP section of this man-page for information about icm-dep ;

--execute ( -e ) [option] bim-file [arguments]

Executes the bim-file, Before specifying bim-file option --no-version-check (see below, or the equivalent short option -n ) can be specified to allow mismatches between icmake ’s main version and the icmake version that was used to compile the bim-file.
Command-line arguments specified beyond bim-file are forwarded as arguments to the bim-file’s main function (cf. the icmscript (7) man-page for details about writing icmake -scripts);

--force ( -f ) [options] source [bim-file]

Acts like option --compile , but compilation is always performed, even if the bim-file is up-to-date;

--help ( -h )

Ends icmake after providing usage info. Usage info is also provided when icmake is started without arguments;

--multicomp ( -m ) [options] jobs ’compiler-spec’

The optional options are the options passed to the icm-multicomp program (cf. section ICM-MULTICOMP below).
See also the icomonf (7) man-page’s #define MULTICOMP directive: when specified threaded compilation is automatically used;

--no-process ( -N )

Implies option --verbose (see below). This option is recognized by options --dependencies, --execute, --source and -t (either as two separate options or by ‘gluing’ both options together, like -Ne ). When specified, the support program is not run, but the command(s) that would have been used are shown to the standard output;

--no-version-check ( -n )

This option is available with the action options --execute, --source, --unassemble , and -t . When specified the main versions stored in the specified icm-bim file and icmake itself may differ. This option should normally not be required, but was primarily added for development purposes;

--preprocess ( -p ) [options] source [pim-file]

The file specified as first argument is pre-processed, producing a ‘ .pim ’ file. If a second filename argument is provided then that file becomes the .pim file. If not specified, then the first filename, using the extension .pim , is used.
With this option pre-processor symbol-defining options can be used: symbols whose values can be used in source . E.g., when issuing the command

icmake -p -d one --define two source dest.pim

icmake pre-processes source , defines the pre-processor symbols one and two (each having value 1), and produces the pim-file dest.pim . Note that instead of using long options --define short options -d can also be used;

--spch ( -S ) ...

A SPCH is built. All options and arguments following --spch are forwarded to the icm-spch support program. (cf. section ICM-SPCH below).
See also the icomonf (7) man-page’s #define SPCH directive: when specified a SPCH is automatically constructed;

--source ( -s ) [options] source [arguments]

Icmake uses --compile to compile the icmake source file specified as first argument (constructing a temporary bim-file) and then uses --execute to execute the bim-file, forwarding any subsequent arguments as arguments to the bim-file’s main function.
Following the --source option options available for icmake ’s --compile command can be specified. Following those options options of icmake ’s --execute options can be specified. Those latter options must be preceded by --execute or -e . E.g., when issuing the command

icmake -s -d one -en source

then icmake first compiles source after defining the pre-processor symbol one , and then executes the bim-file, passing --no-version-check to icm-exec ;

-t tmpspec [options] source [arguments]

This option is intended for icmake -scripts although it can also be used in a command-line icmake call. The -t option can be used in quite a few different ways which is covered in the next section ( EXECUTING ICMAKE SCRIPTS ).

--tmpdir = directory ( -T )

By default temporary files are created in the /tmp sub-directory, or in the user’s home ( ${HOME} ) directory if /tmp/ cannot be used. To specify another directory to write temporary files in icmake ’s option --tmpdir (or -T ) can be specified, followed by the name of an (existing) directory to use for temporary files.
E.g., when compiling an icmake file main.im , the output of icmake ’s pre-processor is written to a temporary file which is removed after compilation. To write the temporary file to ˜/.icmake icmake can be called as

icmake -T ˜/.icmake -c main.im

--unassemble ( -u )

The file specified as first argument is an icmake bim-file, which is unassembled (cf. section ICM-UN below for more information about unassembling icmake bim-files);

--verbose ( -V )

Icmake child processes and their arguments are written to the standard output stream before they are called. This option may precede ‘action’ options ( -c, -d, -e, -s and -u ), either as two separate options or by ‘gluing’ both options together, like -Ve .

--version ( -v )

Ends icmake after displaying its version.

EXECUTING ICMAKE SCRIPTS

The -t option is available primarily for being used in executable icmake scripts. The first line of executable icmake scripts consists of the following components:

	o		a shebang ( #! ) specification followed by icmake ’s location;
	o		the -t option followed by its argument (see below);

and optionally:

	o		compilation and execution options (specified as described at the --source option);
	o		a non-option component (e.g., : ) which will be replaced by the location of the executable icmake script;
	o		remaining components on the first line are forwarded as-is to the icmake script’s main function;

E.g., the following simple icm executable script ‘ args ’ could be defined in ˜/bin :
#!/usr/bin/icmake -t. -d one : two --dir three
void main(int argc, list argv)
{
#ifdef one
printf << "one is defined\n";
#endif
printf << argc << " arguments: " << argv << ’\n’;
}

When it’s called as ˜/bin/args four five then the arguments four and five are added to the two --dir three arguments already specified by the script itself. Called this way the script outputs. Its 1st argument is the name of a temporary .bim file which is different at each new call:
one is defined
/tmp/F04dgh two --dir three four five

The argument of the -t option is used to specify the location of the files used by icmake ’s -t option ( /dir can also be specified as multiple directories, like /dir/sub1/sub2 ):

	o		if it’s a single dot ( -t. ) the compiled (temporary) bim-file is written in icmake ’s directory used for temporary files (e.g., /tmp or $HOME );
	o		if it’s ˜/dir or /dir then icmake writes temporary files in the specified directory, replacing ˜ by the user’s $HOME directory;
	o		if it’s ˜/dir/name or /dir/name then [˜]/dir/name specifies the path of the compiled .bim file, writing all other temporary files in the same directory as the .bim file. The .bim file is kept after execution (allowing it to be executed repeatedly using ’ icmake -e ’). The icmake -script is not compiled if the .bim file is younger than the script.

ICM-DEP

Icm-dep is a support program called by icmake --dependencies (or its short alternative -d ) to determine source- and precompiled-header file dependencies.

When using icmbuild (1) and an icmconf file contains the #define SPCH directive icmake -d is not used; instead, directories inspected when using a SPCH are automatically inspected (and updated when necessary) by icmake -S .

Icmake -d ’s synopsis is
icmake -d [options] argument
Specifications following -d are forwared to icm-dep . The following options can be specified after -d :

--classes = filename ( -c )

By default, icm-dep inspects dependencies of the directories mentioned in the file CLASSES . If the icmconf (7) file specifies PARSER_DIR and/or SCANNER_DIR then those directories are also considered. Use this option to specify the file containing the names of directories to be inspected by icm-dep .

--gch

If an icmconf file specifies the (deprecated) #define PRECOMP directive then icmake -d checks whether precompiled headers must be refreshed. If an icmconf file does not contain a #define PRECOMP diretive, but precompiled headers should nonetheless be inspected, then option --gch can be specified;

--help ( -h )

A summary of icm-dep ’s usage is written to the standard output and icmake terminates, returning 0 to the operating system;

--icmconf = filename ( -i )

By default icmake -d inspects the content of icmconf files, This option is used if instead of icmconf another file should be inspected;

--mainih = mainheader ( -m )

In the icmconf file the #define IH directive is used to specify the suffix of class header files that should be precompiled, assuming that their filenames are equal to the names of the directories which are listed in the CLASSES file. But CLASSES does not specify the name of the program’s top-level directory. This option is used to specify the name of the top-level header file to precompile. By default main.ih is used;

--no-gch

If an icmconf file contains a (deprecated) #define PRECOMP directive but icmake -d should not check whether precompiled headers must be refreshed then specify option --no-gch ;

--no-use-all

If this option is specified then the #define USE_ALL "filename" directive in the icmconf file (cf. icmconf (7)) is ignored;

--use-all = filename

If this option is specified then all files in directories containing the file filename and source files in directories (recursively) depending on the files in those directories are recompiled;

--verbose ( -V )

This option can be specified multiple times. The number of times it is specified determines the verbosity of icmake -d ’s output. If not specified then icmake -d silently performs its duties. If specified once (which is the default specification), then icmake -d writes to the standard output the actions it performs; if specified twice it also reports non-default options and automatically included directories; if specified three times it also reports class dependencies; if specified more often it reports what files it encountered and what decision it would make when go would be specified;

--version ( -v )

Icmake -d writes icm-dep ’s version number to the standard output and terminates, returning 0 to the operating system.

Following the non-terminating options argument go must be specified to allow icmake -d to perform its actions. Specifying another argument results in a ‘dry run’: it analyzes dependencies, but won’t remove or touch files.

Icmake -d can be used for software projects which are developed as described in the C++ Annotations, section Header file organization in chapter Classes . For those projects classes are developed in their own directories, which are direct sub-directories of the project’s main program directory. Their class interfaces are provided in class-header files bearing the names of the class-directories, and all headers that are required by the class’s sources are declared in a separate internal header files, commonly having extensions .ih .

ICM-MULTICOMP

Icmake supports multi-threaded source-file compilation, often significantly reducing the compilation time of the source files of projects. When using icmbuild (1) multi-threaded compilation is automatically used when icmconf files contain the #define MULTICOMP directive (cf. icmconf (7)). It can also be called independently from icmconf using icmake ’s --multicomp (or -m ) option.

Icmake -m ’s synopsis is
icmake -m [options] arguments

Icmake -m accepts the following options:

--help ( -h )

Icmake -m writes a summary of its usage to the standard output and terminates, returning 0 to the operating system;

--nr ( -n )

When compiling source files and option --nr is specified then the thread number compiling a source file is written to the standard output stream.

--quiet ( -q )

When this options is not specified then the path names of the compiled object and source files are written to the standard output stream. When it is specified once only the source files’ directories and filenames are written to the standard output stream, and when it is specified more than once no information about the compiled files is written to the standard output stream.

--threads = nThreads ( -t )

By default the computer’s number of cores determines the number of threads being used when compiling the source files. A different number of threads can be requested using this option, e.g., --threads 5 .

--version ( -v )

Icmake -m reports its version number to the standard output and terminates, returning 0 to the operating system.

Icmake -m needs one command-line argument and an optional second argument:

the first argument is the name of the file specifying which files must be compiled. Use icmbuild (1) to write this file. It can also be constructed otherwise:

The specified file must contain groups of file specifications where each group starts with a line like : support tmp/o 5 where the 2nd element (here: support ) specifies the (sub-)directory of the source files (use . to refer to the project’s top-level directory); the 3rd element (here: tmp/o ) specifies the destination directory of the compiled files (which is created if not existing); and the 4th element (here: t ) specifies the prefix to add in front of the compiled object files.
Following this line the remaining lines of a group specify the names of the source files (located in specified (sub-)directory) to compile.
Once the compilation ends (either because all files were successfully ccompiled, or because a compilation failed) the specification file is removed;

the second argument is optional. By default the following specification is used (all on one line)

g++ -c -o $2 ${ICMAKE_CPPSTD} --Wall -Werror $1

Here $1 is replaced by the location of the source file to compile and $2 is replaced by the location of the compiled object file. If the environment variable ICMAKE_CPPSTD is defined (specifying the C++ standard to use, e.g., ICMAKE_CPPSTD=--std=c++26 ) then its value replaces ${ICMAKE_CPPSTD} in the specification.
If the default compiler specification cannot be used the command to compile source files can be provided as icmake -m ’s second command-line argument, which should be quoted, like

’g++ -c -o $2 ’${ICMAKE_CPPSTD}’ --Wall -Werror $1’

or the second command-line argument can be f:file , where file is the name of a file whose first line contains the specification of the command compiling source files (which must specify $1 and $2 and optionally $ICMAKE_CPPSTD ).
The PATH environment variable is used to locate the compiler; the compiler’s absolute path can also be specified.

ICM-SPCH

Single Pre-Compiled Headers (SPCH) are available using icmake --spch (or -S ).

Icmake -S ’s synopsis is
icmake -S [options] arguments

Icmake -S accepts the following options:

--all = file ( -a )

Call in sequence icm -S ’s options --list, --precompile , and --soft-links (see below), where file is written by option --list and used as option argument for --precompile and --soft-links ;

--classes = filename ( -c )

The file filename is the name of a file containing a list of directories inspected by the --list option (by default CLASSES). The project’s top directory is automatically inspected unless the option --no-topdir is specified;

--help ( -h )

Icmake -S writes a summary of its usage to the standard output and terminates, returning 0 to the operating system;

--internal = .ext ( -i )

.ext is the extension used for the internal headers (including the dot). By default .ih is used;

--list ( -l )

Ignored when option --all is specified.
Write the names of the files to process when constructing an SPCH to the file specified as icmake -S ’s first command line argument. The specified filename may not have an extension or directory specifications (e.g., spch );

--no-topdir ( -n )

Ignore the internal header found in the project’s top directory. This option is used when, e.g., merely constructing a library instead of a program;

--precompile = file ( -p )

Precompile file (the name of the file specified at the option --list ) to the SPCH file specified as icmake -S ’s first command-line argument. If that argument ends in / then the SPCH ’argument’file.gch is written.
By default the SPCH is constructed by the following command (all on one line):

g++ -c -o $2 ${ICMAKE_CPPSTD} -Wall -Werror -O2 -x c++-header $1

Here, $1 is replaced by ’file’, and $2 is replaced by the name of the SPCH, while $ICMAKE_CPPSTD refers to the value of the ICMAKE_CPPSTD environment variable (specifying the C++ standard to use, e.g., ICMAKE_CPPSTD=--std=c++26).
Alternatively, the command constructing the SPCH can be provided as second command-line argument, which should be quoted like

’g++ -c -o $2 ’${ICMAKE_CPPSTD}’ -Wall -Werror -O2 -x c++-header $1’

or the second command-line argument can be f:file , where file is the name of a file whose first line specifies the command constructing the SPCH (which must specify $1 and $2 and optionally $ICMAKE_CPPSTD ).
The PATH environment variable is used to locate the compiler; the compiler’s absolute path can also be used.

--quiet ( -q )

By default the ( g++ ) command constructing the single precompiled header file is echoed to the standard output stream. Specify this option to suppress writing the command to the standard output stream.

--soft-links = file ( -s )

Ignored when option --all is specified.
This option uses the same arguments as used with the --precompile option. This option creates .gch soft-links from the header files listed in file to the generated SPCH-file;

--unused = regex ( -u )

In practice this option is probably not required, but files matching (POSIX extended) regex are not inspected by icmake -S . When used specifications like (...)|(...) can be used to specify multiple regexes. Alternatively f:file can be used as option argument to specify a file whose non-empty lines contain regexes;

--version ( -v )

Icmake -S writes its version number to the standard output and terminates, returning 0 to the operating system;

--warn ( -w )

interactively warn when existing header files are about to be modified, accepting or refusing the modifications. Once refused icm-spch ends.

Icmake -S needs one, and optionally two arguments, which were described at the --list, --precompile , and soft-links option descriptions.

Pre-compiled headers have been available for quite some time, and usually result in a significant reduction of the compilation time. Using single precompiled headers results in a large reduction of required disk-space compared to using precompiled headers for separate directories.

When using SPCHs almost identical precompiled headers for separate directories are avoided: only one precompiled header is constructed which is then used by all components of a project. As identical sections are avoided the sizes (and construction times) of SPCHs are much smaller, usually requiring only 5 to 10 % of the space (and construction time) ccompared to using separately constructed pre-compiled headers.

SPCHs can easily be used in combination with icmbuild (1). Often a specification in a project’s icmconf file like #define SPCH "" is all it takes (cf. icmconf (7)).

ICM-UN

The support program icm-un is called by icmake -u , expecting one argument, a bim-file. It disassembles the binary file an shows the assembler instructions and the structure of the bim-file.

As an illustration, assume the following script is compiled by icmake -c demo.im ):

void main()
{
printf << "hello world\n";
}

the resulting demo.bim file is disasembled by icmake -u demo.bim writing the following to the standard output fle:

icm-un by Frank B. Brokken (f.b.brokken@rug.nl)
icm-un V12.04.00
Copyright (c) GPL 1992-2024. NO WARRANTY.

Binary file statistics:
strings at offset 0x0025
variables at offset 0x0033
filename at offset 0x0033
code at offset 0x0014
first opcode at offset 0x0021

String constants dump:
[0025 (0000)] ""
[0026 (0001)] "hello world."

Disassembled code:
[0014] 06 01 00 push string "hello world."
[0017] 05 01 00 push int 0001
[001a] 1b 1d callrss 1d (printf)
[001c] 1c 02 add sp, 02
[001e] 04 push int 0
[001f] 24 pop reg
[0020] 23 ret
[0021] 21 14 00 call [0014]
[0024] 1d exit

Offsets are shown using the hexadecimal number system and are absolute byte offsets in the bim-file. The string constants dump also shows, between parentheses, the offsets of the individual strings relative to the beginning of the strings section. The output also shows the opcodes of the instructions of the compiled .im source files. If opcodes use arguments then these argument values are shown following their opcodes. Each opcode line ends by showing the opcode’s mnemonic plus (if applicable) the nature of its argument.

FILES

The mentioned paths are the ones that are used in the source distribution and are used by the Debian Linux distribution. However, they are sugestive only and may have been configured differently:

Binary programs:

	o		/usr/bin/icmake : the main icmake program;
	o		/usr/bin/icmbuild : the wrapper program around the icmbuild script handling standard program maintenance;
	o		/usr/bin/icmodmap : the module mapper which initializes the maintenance of C++ programs using modules;
	o		/usr/bin/icmstart : an icmake -script that is can be used to create the startup-files of new projects;

Support programs:

	o		/usr/libexec/icmake/icm-comp : the compiler called by icmake ;
	o		/usr/libexec/icmake/icm-dep : the support program handling class-dependencies;
	o		/usr/libexec/icmake/icm-exec : the byte-code interpreter;
	o		/usr/libexec/icmake/icm-multicomp : the multi-thread source file compiler;
	o		/usr/libexec/icmake/icm-pp : the preprocessor called by icmake ;
	o		/usr/libexec/icmake/icm-spch : the program preparing SPCHs;
	o		/usr/libexec/icmake/icm-un : the icmake unassembler.

EXAMPLES

The distribution (usually in /usr/share/doc/icmake ) contains a directory examples containing additional examples of icmake script. The icmstart script is an icmake script as is /usr/libexec/icmake/icmbuild , which is called by the /usr/bin/icmbuild program. See also the EXAMPLE section in the icmscript (7) man-page.

BUGS

None reported.

COPYRIGHT

This is free software, distributed under the terms of the GNU General Public License (GPL).

AUTHOR

Frank B. Brokken ( f.b.brokken@rug.nl ).