Man page - foo2zjs(1)
Packages contains this manual
- gipddecode(1)
- foo2qpdl(1)
- foo2zjs-wrapper(1)
- foo2xqx(1)
- qpdldecode(1)
- foo2hp2600-wrapper(1)
- foo2zjs(1)
- oakdecode(1)
- foo2zjs-pstops(1)
- slxdecode(1)
- foo2oak-wrapper(1)
- foo2hiperc(1)
- foo2ddst(1)
- foo2slx(1)
- foo2xqx-wrapper(1)
- ddstdecode(1)
- foo2oak(1)
- foo2lava(1)
- foo2lava-wrapper(1)
- foo2qpdl-wrapper(1)
- opldecode(1)
- lavadecode(1)
- zjsdecode(1)
- foo2slx-wrapper(1)
- arm2hpdl(1)
- printer-profile(1)
- hbpldecode(1)
- xqxdecode(1)
- foo2hp(1)
- foo2hiperc-wrapper(1)
- hipercdecode(1)
- foo2ddst-wrapper(1)
- foo2hbpl2-wrapper(1)
- foo2hbpl2(1)
apt-get install printer-driver-foo2zjs-common
Manual
foo2zjs
NAMESYNOPSIS
DESCRIPTION
COMMAND LINE OPTIONS
Normal Options
Printer Tweaking Options
Debugging Options
EXAMPLES
FILES
SEE ALSO
AUTHOR
NAME
foo2zjs - Convert Ghostscript pbmraw or bitcmyk format into a ZJS printer stream
SYNOPSIS
foo2zjs [ options ] < pbmraw-file > zjs-file
foo2zjs [ options ] < bitcmyk-file > zjs-file
foo2zjs [ options ] < pksmraw-file > zjs-file
DESCRIPTION
foo2zjs converts Ghostscript pbmraw, bitcmyk, or pksmraw output formats to monochrome or color ZJS streams, for driving the Minolta/QMS 2300 DL network color laser printer and other Zenographics-based printers.
COMMAND LINE OPTIONS
Normal Options
These are the options used to select the parameters of a print job that are usually controlled on a per job basis.
|
-c |
Force color mode if autodetect doesn’t work. |
-d duplex
Duplex code to send to printer [1].
-g xpix x ypix
Set page dimensions in pixels [10200x6600].
-m media
Media code to send to printer [1].
-p paper
Paper code to send to printer [1].
-n copies
Number of copies [1].
-r xres x yres
Set device resolution in pixels/inch [1200x600].
-s source
Source (InputSlot) code to send to printer [7].
|
-t |
Draft mode. Every other pixel is white. |
-T density
Print density (1-5). The default is 3 (medium).
-J filename
Filename string to send to printer.
-U username
Username string to send to printer.
Printer Tweaking Options
These are the
options used to customize the operation of
foo2zjs
for a particular printer.
-u
xoff
x
yoff
Set the offset of the start of the printable region from the upper left corner, in pixels [0x0].
-l xoff x yoff
Set the offset of the end of the printable region from the lower right corner, in pixels [0x0].
-L mask
Send logical clipping amounts implied by -u/-l in the ZjStream [3].
|
-P |
Do not send START_PLANE codes on monochrome output. May be needed by some black and white only printers, such as the HP LaserJet 1000. |
||
|
-A |
AllIsBlack: convert C=1,M=1,Y=1 to just K=1. Works with bitcmyk input only. |
||
|
-B |
BlackClears: K=1 forces C,M,Y to 0. Works with bitcmyk input only. |
-X padlen
Add extra zero padding to the end of BID segments. The default is 16 bytes. Padding 16 bytes of zeroes is needed for older ZjStream printers, such as the Minolta 2200DL and HP LaserJet 1000, and seems harmless to newer ones, such as the Minolta 2300DL. So the default should be good for all cases.
-z model
Model. Default is 0.
Debugging Options
These options
are used for debugging
foo2zjs
.
-S
plane
Output just a single color plane from a color print and print it on the black plane. The default is to output all color planes.
-D level
Set Debug level [0].
EXAMPLES
Create a black and white ZJS stream:
gs -q -dBATCH
-dSAFER -dQUIET -dNOPAUSE
-sPAPERSIZE=letter -r1200x600 -sDEVICE=pbmraw
-sOutputFile=- - < testpage.ps
| foo2zjs -r1200x600 -g10200x6600 -p1 >testpage.zm
Create a color ZJS stream:
gs -q -dBATCH
-dSAFER -dQUIET -dNOPAUSE
-sPAPERSIZE=letter -g10200x6600 -r1200x600 -sDEVICE=bitcmyk
-sOutputFile=- - < testpage.ps
| foo2zjs -r1200x600 -g10200x6600 -p1 >testpage.zc
FILES
/usr/bin/foo2zjs
SEE ALSO
foo2zjs-wrapper (1), zjsdecode (1)
AUTHOR
Rick Richardson
<rick.richardson@comcast.net>
http://foo2zjs.rkkda.com/