Man page - elektroid-cli(1)

Packages contains this manual

Package: elektroid
apt-get install elektroid

Manuals in package:

Documentations in package:

elektroid

Manual

ELEKTROID-CLI

NAME
SYNOPSIS
DESCRIPTION
SUPPORTED DEVICES
DEVICE COMMANDS
FILESYSTEM COMMANDS
OPTIONS
EXAMPLES
SEE ALSO
AUTHOR

NAME

elektroid-cli - Sample and MIDI device manager (CLI)

SYNOPSIS

elektroid-cli [ options ] command

DESCRIPTION

elektroid-cli is part of Elektroid, a sample and MIDI device manager. See man elektroid for the GUI application.

With Elektroid you can easily upload and download audio files and manage different types of data on different MIDI devices, such as presets, projects or tunings. It can also be used to send and receive SysEx MIDI files.

SUPPORTED DEVICES

	•		Arturia MicroBrute
	•		Arturia MicroFreak
	•		Casio CZ-101
	•		Elektron Analog Four MKI, MKII and Keys
	•		Elektron Analog Heat MKI, MKII and +FX
	•		Elektron Analog Rytm MKI and MKII
	•		Elektron Digitakt I and II
	•		Elektron Digitone I and II and Digitone Keys
	•		Elektron Model:Cycles
	•		Elektron Model:Samples
	•		Elektron Syntakt
	•		Eventide ModFactor, PitchFactor, TimeFactor, Space and H9
	•		Moog Little Phatty and Slim Phatty
	•		Novation Summit and Peak
	•		Samplers implementing MIDI SDS

DEVICE COMMANDS

Device commands operate over the device itself. For the commands that operate over the different types of data a device provides see the filesystem commands section.
[ ld | list-devices ]

List compatible devices

[ df | info-storage ] device_number

Show size and use of +Drive and RAM where available

info device_number

Show device info

send file device_number

Send MIDI data file to device

receive device_number file

Receive MIDI data file from device

upgrade firmware device_number

Upgrade the device

FILESYSTEM COMMANDS

Different filesystem operations are implemented on different connectors so a command has the following form:
connector, hyphen (’-’), filesystem name, hyphen (’-’), and the
operation itself
Provided paths must always be prepended with the device id and a colon
(’:’), e.g. 0:/samples. Paths pointing to a data, sound or project file
use the index of a file instead of its name.
These are the available operations.
[ ls | list ] device_number:path_to_directory

List directory contents

mkdir device_number:path_to_directory

Create a directory and its parent directories as needed

[ rmdir | rm ] device_number:path_to_directory

Delete a directory recursively

[ ul | upload ] file device_number:path_to_file_or_directory

Upload a file. If the path does not exist it will be created.

[ dl | download | rdownload | rdl | backup ]
device_number:path_to_file_or_directory [ destination ]

Download a file into the destination directory or the current directory if not provided.

mv device_number:path_to_file_or_directory
device_number:path_to_file_or_directory

Move a file. If the destination path does not exist, it will be created.

rm device_number:path_to_file

Delete a file

cl device_number:path_to_file

Clear file

cp device_number:path_to_file device_number:path_to_file

Copy a file

sw device_number:path_to_file device_number:path_to_file

Swap files

OPTIONS

-v give verbose output. Use it more than once for more verbosity.

EXAMPLES

elektroid-cli ld

lists the available devices.

elektroid-cli info 0

shows information about the device, including the connector and the available filesystems.

elektroid-cli elektron-sample-ul square.wav 0:/waveforms

uploads a sample to an Elektron device.

elektroid-cli sds-mono16-dl 0:/1

downloads a mono 16 bits sample from an SDS sampler.

elektroid-cli summit-single-ls 0:/A

lists Novation Summit single patches in bank A.

AUTHOR

elektroid-cli was written by David García Goñi <dagargo@gmail.com>.

This manual page was written by Dennis Braun <snd@debian.org> for the Debian project (but may be used by others).