Man page - dcf77(1)
Packages contains this manual
- tacs(1)
- anetz(1)
- nmt(1)
- jollycom(1)
- fuvst_sniffer(1)
- cnetz_sim(1)
- bnetz-dialer(1)
- amps(1)
- 5-ton-folge(1)
- bnetz(1)
- osmotv(1)
- pocsag(1)
- osmoradio(1)
- dcf77(1)
- jtacs(1)
- datenklo(1)
- zeitansage(1)
- cnetz_magnetic(1)
- fuvst(1)
- imts(1)
- cnetz(1)
- eurosignal(1)
- matesimulator(1)
- cnetz_memory_card_generator(1)
- mpt1327(1)
- golay(1)
- imts-dialer(1)
- radiocom2000(1)
apt-get install osmocom-analog
Manual
dcf77
NAMESYNOPSIS
NAME
dcf77 - http://osmocom-analog.eversberg.eu/docs/
SYNOPSIS
dcf77 [ -a hw:0,0 ] [ <options> ]
|
-h --help |
This help
|
--config [Λ/]<path to config file> |
Give a config file to use. If it starts with βΛ/β, path is at home dir. Each line in config file is one option, β-β or β--β must not be given!
|
-v --verbose <level> | <level>,<category>[,<category>[,...]] | list |
Use βlistβ to get a list of all levels and categories. Verbose level: digit of debug level (default = β3β) Verbose level+category: level digit followed by one or more categories -> If no category is specified, all categories are selected
|
-v --verbose date |
Show date with debug output
|
-a --audio-device hw:<card>,<device> |
Sound card and device number (default = ββ)
|
-s --samplerate <rate> |
Sample rate of sound device (default = β192000β)
|
-b --buffer <ms> |
How many milliseconds are processed in advance (default = β50β) A buffer below 10 ms requires low interval like 0.1 ms.
|
-T --tx |
Transmit time signal (default)
|
-R --rx |
Receive time signal
|
-F --fake |
Use given time stamp: <year> <month> <day> <hour> <min> <sec>. All values have to be numerical. The year must have 4 digits.
|
--feierabend |
||
|
--end-of-working-day |
Use fake time stamp that equals 5 OβClock PM.
|
--geburtstag |
||
|
--birthday |
Use fake time stamp that equals birth of the author.
|
-W --weather <weather> <extreme> <rain> <wind dir> <wind bft> <temperature> |
Send these weather info for all regions / all days. See -L for infos on values. weather = 1..15 for common day and night weather. weather = 1..15,1..15 for specific day and night weather. extreme = 0..15 for extreme weather conditions. rain = 0..100 for rain/show probability. (closest is used) wind dir = N | NE | E | SE | S | SW | W | NW | 0 for wind direction. wind bft = <bft> for wind speed in bft. (closest is used) temerature = <celsius> for common min and max temperature. temerature = <celsius>,<celsius> for specific min and max temperature.
|
--beach-party |
Beach weather, equivalent to -W 1 0 0 0 2 35,20
|
--santa-claus |
||
|
--muenster-2005 |
Deep snow, equivalent to -W 7 1 100 E 3 1,-1
|
-A --at-region <region> <advance minutes> |
Alter time, so that the weather of the given region is transmitted. To allow the receiver to sync, give time to advance in minutes.
|
-L --list |
List all regions / weather values.
|
-C --city <name fragment> |
Search for city (case insensitive) and display its region code.
|
-D --double-amplitude |
Transmit with double amplitude by using differential stereo output.
|
--test-tone |
Transmit a test tone (10% level, 1000 Hz) with the carrier.
|
-r --realtime <prio> |
Set prio: 0 to disable, 99 for maximum (default = 0)
|
--fast-math |
Use fast math approximation for slow CPU / ARM based systems.
Press βwβ key to toggle display of RX wave form. Press βmβ key to toggle display of measurement values.