Man page - resetsys(3)
Packages contas this manual
- ibwrtf(3)
- ibcnt(3)
- ibrd(3)
- ibeot(3)
- ibclr(3)
- ibrpp(3)
- ibloc(3)
- ibrsv2(3)
- ibppc(3)
- ibstop(3)
- ibsad(3)
- ibrsp(3)
- ibist(3)
- ibwrta(3)
- ibsta(3)
- ibrda(3)
- ibgts(3)
- ibrdf(3)
- ibtmo(3)
- ibcac(3)
- ibvers(3)
- ibcmd(3)
- ibtrg(3)
- ibsic(3)
- ibeos(3)
- ibcmda(3)
- ibwait(3)
- ibonl(3)
- ibpct(3)
- ibrsc(3)
- ibwrt(3)
- ibbna(3)
- iblines(3)
- ibrsv(3)
- ibpad(3)
- ibspb(3)
- iberr(3)
- ibask(3)
- ibsre(3)
- ibconfig(3)
- ibfind(3)
- ibln(3)
- ibdev(3)
- ibevent(3)
Package: libgpib-doc
apt-get install libgpib-doc
apt-get install libgpib-doc
Manuals in package:
Documentations in package:
Manual
| RESETSYS(3) | RESETSYS(3) |
NAME
ResetSys - reset system
SYNOPSIS
#include <gpib/ib.h>
void ResetSys(int board_desc, const Addr4882_t addressList[]);
DESCRIPTION
ResetSys() has the following effects:
•The remote enable bus line is asserted.
•An interface clear is performed (the interface
clear bus line is asserted for at least 100 microseconds).
•The device clear command is sent to all the
devices on the bus.
•The *RST message is sent to every device
specified in the addressList.
COPYRIGHT
Copyright © 2003-2006, 2008 Frank Mori Hess
| 11/30/2025 | linux-gpib 4.3.7 |