Man page - limeutil(1)

Packages contains this manual

Package: limesuite
apt-get install limesuite

Documentations in package:

limesuite

Manual

LIMEUTIL

NAME
SYNOPSIS
DESCRIPTION
OPTIONS
Advanced options
Calibrations sweep
HOMEPAGE
SEE ALSO

NAME

LimeUtil - control and update LMS7 based transceiver devices

SYNOPSIS

LimeUtil [ OPTIONS ]

DESCRIPTION

LimeUtil is a tool to show information about and control LMS7 based transceiver devices such as the LimeSDR. It can be used to update the firmware and to calibrate the device.

OPTIONS

	--help		Print a help message.
	--info		Print information about LimeSuite and found devices.

--find [=" SPEC "]

Discover available devices, restricted to those matching the SPEC if given. If no matching devices are found it will exit with exit status 1.

--make [=" SPEC "]

Create a device instance.

Advanced options

--args [=" ARGS "]

Supply arguments ARGS to the --update , --fpga and --fw options.

--update

Download latest firmware and program it into the device flash memory.

--fpga =" FILE "

Program FPGA firmware image in FILE to device flash memory.

--fw =" FILE "

Program FX3 firmware image in FILE to device flash memory.

--timing

Time interfaces and operations.

Calibrations sweep

--cal [=" ARGS "]

Calibrate device. Use ARGS to select and configure device.

--start = FREQ

Start calibration sweep at frequency FREQ Hz.

--stop = EQ

Stop calibration sweep at frequency FREQ Hz.

--step = STEP

Step frequency during calibration sweep by STEP Hz (default 1 MHz).

--bw = BW

Set calibration bandwidth to BW Hz (default 30 MHz).

--dir = DIR

Set calibration direction to DIR (one of RX, TX or BOTH, default is BOTH).

--chans = CHANNELS

Set calibration channels to CHANNELS (one of 0, 1 or ALL, default is ALL).

HOMEPAGE

LimeUtil is part of the Lime Suite .