Man page - alos_pre_process_ss(1)
Packages contas this manual
- make_s1a_tops(1)
- make_slc_rs2(1)
- ext_orb_s1a(1)
- make_slc_lt1(1)
- p_scatter(1)
- assemble_tops(1)
- spectral_diversity(1)
- calc_dop_orb_envi(1)
- cut_slc(1)
- phasefilt(1)
- phasediff(1)
- sbas(1)
- esarp(1)
- conv(1)
- make_slc_nsr(1)
- make_gaussian_filter(1)
- xcorr(1)
- read_sarleader_dpaf(1)
- ext_orb_lt1(1)
- make_slc_csk(1)
- nearest_grid(1)
- phase2topo(1)
- split_spectrum(1)
- stitch_tops(1)
- bperp(1)
- asa_im_decode(1)
- resamp(1)
- offset_topo(1)
- extend_orbit(1)
- ers_line_fixer(1)
- merge_swath(1)
- geocode_slc(1)
- make_slc_gf3(1)
- solid_tide(1)
- read_data_file_dpaf(1)
- envisat_dump_header(1)
- split_aperture(1)
- make_raw_csk(1)
- envi_slc_decode(1)
- make_slc_tsx(1)
- make_s1a_tops_6par(1)
- read_data_file_ccrs(1)
- phasediff_get_topo_phase(1)
- asa_cat(1)
- calc_dop_orb(1)
- fitoffset(1)
- make_slc_s1a(1)
- envisat_dump_data(1)
apt-get install gmtsar-core
Manual
| ALOS_PRE_PROCESS_SS(1) | User Commands | ALOS_PRE_PROCESS_SS(1) |
NAME
ALOS_pre_process_SS - ALOS_pre_process_SS
SYNOPSIS
ALOS_pre_process_SS imagefile LEDfile [-near near_range] [-radius RE] [-swath swath#] [-burst_skip] [-num_burst] [-swap] [-V] [-debug] [-quiet]
DESCRIPTION
This program is part of GMTSAR.
creates data.raw and writes out parameters (PRM format) to stdout
imagefile ALOS Level 1.0 complex file (CEOS format): LEDfile ALOS Level 1.0 LED file (CEOS leaderfile format):
- options:
-near near_range specify the near_range (m) -radius RE specify the local earth radius (m) -swath specify swath number 1-5 [default 4] -burst_skip number of burst to skip before starting output (1559 lines/burst) -num_burst number of burst to process [default all]
- there are 72 bursts in a WB1 frame
-swap do byte-swap (should be automatic) -fd1 [DOPP] sets doppler centroid [fd1] to DOPP -V verbose write information) -debug write even more information -quiet don't write any information Example: ALOS_pre_process_SS IMG-HH-ALPSRS049842950-W1.0__D LED-ALPSRS049842950-W1.0__D -near 847916 -radius 6371668.872945 -burst_skip 5 -num_burst 36
- burst #
- look_angle #lines_burst
- 1
- 20.1 247
- 2
- 26.1 356
- 3
- 30.6 274
- 4
- 34.1 355
- 5
- 36.5 327
Usage: ALOS_pre_process_SS imagefile LEDfile [-near near_range] [-radius RE] [-swath swath#] [-burst_skip] [-num_burst] [-swap] [-V] [-debug] [-quiet]
creates data.raw and writes out parameters (PRM format) to stdout
imagefile ALOS Level 1.0 complex file (CEOS format): LEDfile ALOS Level 1.0 LED file (CEOS leaderfile format):
- options:
-near near_range specify the near_range (m) -radius RE specify the local earth radius (m) -swath specify swath number 1-5 [default 4] -burst_skip number of burst to skip before starting output (1559 lines/burst) -num_burst number of burst to process [default all]
- there are 72 bursts in a WB1 frame
-swap do byte-swap (should be automatic) -fd1 [DOPP] sets doppler centroid [fd1] to DOPP -V verbose write information) -debug write even more information -quiet don't write any information Example: ALOS_pre_process_SS IMG-HH-ALPSRS049842950-W1.0__D LED-ALPSRS049842950-W1.0__D -near 847916 -radius 6371668.872945 -burst_skip 5 -num_burst 36
- burst #
- look_angle #lines_burst
- 1
- 20.1 247
- 2
- 26.1 356
- 3
- 30.6 274
- 4
- 34.1 355
- 5
- 36.5 327
| May 2024 | ALOS_pre_process_SS |